Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA653IDRBTIC OPAMP JFET 1 CIRCUIT 8SON |
1,337 | - |
|
Datasheet | - | 8-VDFN Exposed Pad | Tape & Reel (TR) | Active | J-FET | 1 | - | 2675V/µs | - | 500 MHz | 10 pA | 1 mV | 32mA | 70 mA | 7 V | 13 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SON (3x3) |
|
OPA2228PIC OPAMP GP 2 CIRCUIT 8DIP |
3,254 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 11V/µs | 33 MHz | - | 2.5 nA | 5 µV | 3.7mA (x2 Channels) | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
THS3001HVIDGNRIC OPAMP CFA 1 CIRCUIT 8HVSSOP |
4,798 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Obsolete | Current Feedback | 1 | - | 6500V/µs | 1.75 GHz | 420 MHz | 2 µA | 1 mV | 6.9mA | 120 mA | 9 V | 37 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
OPA3S2859IRTWRDUAL-CHANNEL, 900-MHZ, 2.2-NV/HZ |
2,084 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Programmable Gain | 2 | - | 350V/µs | 900 MHz | 130 MHz | 50 pA | 900 µV | 44mA | 74 mA | 3.3 V | 5.25 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 24-WQFN (4x4) |
|
LM6171AIMIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,013 | - |
|
Datasheet | VIP™ III | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 3600V/µs | 100 MHz | 160 MHz | 1 µA | 1.5 mV | 2.5mA | 116 mA | 5.5 V | 34 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LM6172IM/NOPBIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
4,915 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 2 | - | 3000V/µs | 100 MHz | 160 MHz | 1.2 µA | 400 µV | 4.6mA (x2 Channels) | 90 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA646UBIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
3,225 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 180V/µs | - | - | 2 µA | 3 mV | 5.25mA | - | 9 V | 11 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
TL071MLBIC OPAMP JFET 1 CIRCUIT TO99-8 |
3,862 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 13V/µs | 3 MHz | - | 65 pA | 3 mV | 1.4mA | - | 10 V | 30 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
|
|
THS4021CDGNRIC OPAMP VFB 1 CIRCUIT 8HVSSOP |
3,475 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 470V/µs | - | 350 MHz | 3 µA | 500 µV | 7.8mA | - | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
THS4021IDGNRIC OPAMP VFB 1 CIRCUIT 8HVSSOP |
2,239 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 470V/µs | - | 350 MHz | 3 µA | 500 µV | 7.8mA | - | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
