Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4042IDGNRIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
1,861 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 400V/µs | - | 165 MHz | 2.5 µA | 2.5 mV | 8mA (x2 Channels) | 100 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
THS4130IDIC OPAMP DIFF 1 CIRCUIT 8SOIC |
1,212 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
INA101KU/1KIC INST AMP 1 CIRCUIT 16SOIC |
3,465 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 0.4V/µs | - | 300 kHz | 15 nA | 125 µV | 6.7mA | 10 mA | 10 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
UC3176QPTRIC POWER 2 CIRCUIT 28PLCC |
4,081 | - |
|
Datasheet | - | 28-LCC (J-Lead) | Tape & Reel (TR) | Obsolete | Power | 2 | - | 1V/µs | 1 MHz | 1 MHz | 100 nA | 8 mV | 21mA (x2 Channels) | 3.5 mA | 3 V | 35 V | -55°C ~ 150°C | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
OPA4131PJIC OPAMP JFET 4 CIRCUIT 14DIP |
1,304 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 10V/µs | 4 MHz | - | 50 pA | 1.5 mV | 1.5mA (x4 Channels) | 25 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
THS4131CDGNIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
1,320 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Obsolete | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | 85 mA | 4 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
INA141UAIC INST AMP 1 CIRCUIT 8SOIC |
2,302 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Instrumentation | 1 | - | 4V/µs | - | 1 MHz | 2 nA | 20 µV | 750µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4130CDGNIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
977 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Obsolete | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 14mA | 85 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
VCA2615RGZRIC VARIABLE GAIN 2 CIRC 48VQFN |
1,365 | - |
|
Datasheet | - | 48-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Variable Gain | 2 | Differential | 100V/µs | 42 MHz | 50 MHz | - | - | - | 60 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 48-VQFN (7x7) |
|
|
THS4131IDGNIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
470 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Obsolete | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
