Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
VCA2618YRIC VARIABLE GAIN 2 CIRC 32TQFP |
2,430 | - |
|
Datasheet | - | 32-TQFP | Tape & Reel (TR) | Obsolete | Variable Gain | 2 | Differential | 300V/µs | 100 MHz | 30 MHz | 1 nA | - | - | 40 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 32-TQFP (5x5) |
|
THS4022CDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
4,649 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Obsolete | Voltage Feedback | 2 | - | 470V/µs | 350 MHz | 350 MHz | 3 µA | 500 µV | 7.8mA (x2 Channels) | 100 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
THS4022IDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
2,957 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Obsolete | Voltage Feedback | 2 | - | 470V/µs | 350 MHz | 350 MHz | 3 µA | 500 µV | 7.8mA (x2 Channels) | 100 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
ONET9901PARGPIC LIMITING 1 CIRCUIT 20QFN |
1,278 | - |
|
Datasheet | - | 20-VFQFN Exposed Pad | Tube | Obsolete | Limiting | 1 | Differential | - | - | 10 GHz | - | - | 35mA | - | 3 V | 3.6 V | 0°C ~ 85°C | - | - | Surface Mount | 20-QFN (4x4) |
|
UC3176QPIC POWER 2 CIRCUIT 28PLCC |
3,492 | - |
|
Datasheet | - | 28-LCC (J-Lead) | Tube | Obsolete | Power | 2 | - | 1V/µs | 1 MHz | 1 MHz | 100 nA | 8 mV | 21mA (x2 Channels) | 3.5 mA | 3 V | 35 V | -55°C ~ 150°C | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
TL064MJBIC OPAMP JFET 4 CIRCUIT 14CDIP |
1,636 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x4 Channels) | 10 mA | 10 V | 60 V | -55°C ~ 125°C | - | - | Through Hole | 14-CDIP |
|
LM6144AIM/NOPBIC OPAMP GP 4 CIRCUIT 14SOIC |
263 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x4 Channels) | 22 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
VCA810AIDRIC VARIABLE GAIN 1 CIRCUIT 8SOIC |
1,136 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Variable Gain | 1 | - | 350V/µs | - | 35 MHz | 6 µA | 100 µV | 20mA | 60 mA | 8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS3096PWPIC OPAMP CFA 2 CIRCUIT 14HTSSOP |
3,785 | - |
|
Datasheet | - | 14-PowerTSSOP (0.173", 4.40mm Width) | Bulk | Active | Current Feedback | 2 | - | 5700V/µs | 145 MHz | 160 MHz | 4 µA | 900 µV | 9.5mA (x2 Channels) | 280 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-HTSSOP |
|
OPA121KU-TIIC OPAMP GP 1 CIRCUIT 8SOIC |
2,463 | - |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 2V/µs | 2 MHz | - | 1 pA | 500 µV | 2.5mA | 10 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
