Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC2252AMJGBIC OPAMP GP 2 CIRCUIT 8CDIP |
230 | - |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.12V/µs | 210 kHz | - | 1 pA | 200 µV | 80µA (x2 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
|
5962-9088101MPAIC OPAMP GP 1 CIRCUIT 8CDIP |
118 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.65V/µs | 2 MHz | - | 25 nA | 120 µV | 200µA | 20 mA | 4 V | 40 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
|
5962-9460205QPAIC OPAMP JFET 2 CIRCUIT 8CDIP |
769 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 45V/µs | 10 MHz | - | 20 pA | 700 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
|
TLE2061AMJGBIC OPAMP JFET 1 CIRCUIT 8CDIP |
165 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 500 µV | 290µA | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
|
5962-9080702QPAIC OPAMP JFET 1 CIRCUIT 8CDIP |
138 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 500 µV | 290µA | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
|
TLC2262AMJGBIC CMOS 2 CIRCUIT 8CDIP |
227 | - |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.55V/µs | 730 kHz | - | 1 pA | 300 µV | 425µA (x2 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
|
5962-9469203QPAIC CMOS 2 CIRCUIT 8CDIP |
205 | - |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.55V/µs | 730 kHz | - | 1 pA | 300 µV | 425µA (x2 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
5962-9851501Q2AIC OPAMP JFET 2 CIRCUIT 20LCCC |
140 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | J-FET | 2 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA (x2 Channels) | 40 mA | 10 V | 30 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
5962-9555201NXDRIC CMOS 2 CIRCUIT 8SOIC |
7,401 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 2.4mA (x2 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
TLC2201MFKBIC CMOS 1 CIRCUIT 20LCCC |
999 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | CMOS | 1 | Rail-to-Rail | 2.9V/µs | 1.9 MHz | - | 4 µA | 2 mV | 5.6mA | 50 mA | 4.6 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
