Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE2074MJIC OPAMP JFET 4 CIRCUIT 14CDIP |
172 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 40V/µs | 10 MHz | - | 20 pA | 490 µV | 3.1mA (x4 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C | - | - | Through Hole | 14-CDIP |
|
5962-9460202Q2AIC OPAMP JFET 2 CIRCUIT 20LCCC |
582 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | J-FET | 2 | - | 40V/µs | 10 MHz | - | 20 pA | 490 µV | 1.7mA (x2 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
TLE2072MFKBIC OPAMP JFET 2 CIRCUIT 20LCCC |
132 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | J-FET | 2 | - | 40V/µs | 10 MHz | - | 20 pA | 490 µV | 1.7mA (x2 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
TLC2202MJGBIC CMOS 2 CIRCUIT 8CDIP |
6,805 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 2.9V/µs | 1.9 MHz | - | 4 µA | 2 mV | 5.6mA (x2 Channels) | 50 mA | 4.6 V | 16 V | -55°C ~ 125°C | - | - | Through Hole | 8-CDIP |
|
|
5962-9460206QCAIC OPAMP JFET 4 CIRCUIT 14CDIP |
297 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 70V/µs | 10 MHz | - | 1 pA | 250 µV | 730µA (x4 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
|
TLE2074AMJBIC OPAMP JFET 4 CIRCUIT 14CDIP |
182 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 45V/µs | 10 MHz | - | 1 pA | 250 µV | 730µA (x4 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
TLV2422MUBIC OPAMP GP 2 CIRCUIT 10CFP |
745 | - |
|
Datasheet | LinCMOS™ | 10-CDFF | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.02V/µs | 5.3 MHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 12 mA | 2.7 V | 10 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-CFP |
|
|
5962-9751102QPAIC CMOS 2 CIRCUIT 8CDIP |
180 | - |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 1.4V/µs | 1.81 MHz | - | 60 pA | 300 µV | 750µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
|
5962-9088204QPAIC CMOS 2 CIRCUIT 8CDIP |
8,858 | - |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 2.7V/µs | 1.9 MHz | - | 1 pA | 80 µV | 1.8mA (x2 Channels) | 50 mA | 4.6 V | 16 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
|
TLE2071AMFKBIC OPAMP JFET 1 CIRCUIT 20LCCC |
138 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | J-FET | 1 | - | 45V/µs | 10 MHz | - | 20 pA | 470 µV | 1.6mA | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
