Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2392YBJTAMPLIFIER |
3,607 | - |
|
Datasheet | - | 9-XFBGA, DSBGA | Tape & Reel (TR) | Active | Standard | 2 | Push-Pull, Rail-to-Rail | 4.5V/µs | 13 MHz | - | 0.01 pA | 2 µV | 1.22mA (x2 Channels) | 65 mA | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 9-DSBGA (1.16x1.16) |
|
LMH6702MA/NOPBIC OPAMP CFA 1 CIRCUIT 8SOIC |
4,540 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 1 | - | 3100V/µs | - | 1.7 GHz | 6 µA | 1 mV | 12.5mA | 80 mA | 10 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLC2652CPIC OPAMP ZERO-DRIFT 1 CIRC 8DIP |
2,128 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Tube | Active | Zero-Drift | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.6 µV | 1.5mA | 50 mA | 3.8 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
INA122PIC INST AMP 1 CIRCUIT 8DIP |
4,693 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 0.16V/µs | - | 120 kHz | 10 nA | 100 µV | 60µA | 30 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
INA131APIC INST AMP 1 CIRCUIT 8DIP |
4,685 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 0.7V/µs | - | 70 kHz | 500 pA | 25 µV | 2.2mA | 20 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LF356HIC OPAMP JFET 1 CIRCUIT TO99-8 |
1,152 | - |
|
Datasheet | BI-FET™ | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 12V/µs | 5 MHz | - | 30 pA | 3 mV | 5mA | - | 30 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
|
INA848IDIC OPAMP |
2,851 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 45V/µs | - | 2.8 MHz | 25 nA | 10 µV | 6.2mA | 30 mA | 8 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
OPA2277MDTEPIC OPAMP GP 2 CIRCUIT 8SOIC |
4,126 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.8V/µs | 1 MHz | - | 500 pA | 20 µV | 790µA (x2 Channels) | 35 mA | 4 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
INA101KUIC INST AMP 1 CIRCUIT 16SOIC |
3,551 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | Instrumentation | 1 | - | 0.4V/µs | - | 300 kHz | 15 nA | 125 µV | 6.7mA | 10 mA | 10 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
INA101HPIC INST AMP 1 CIRCUIT 14DIP |
4,534 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 0.4V/µs | - | 300 kHz | 15 nA | 125 µV | 6.7mA | 10 mA | 10 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
