Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA111BPIC INST AMP 1 CIRCUIT 8DIP |
1,406 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 17V/µs | - | 2 MHz | 2 pA | 100 µV | 3.3mA | 30 mA | 12 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
INA116PAIC INST AMP 1 CIRCUIT 16DIP |
1,221 | - |
|
Datasheet | Difet® | 16-DIP (0.300", 7.62mm) | Tube | Not For New Designs | General Purpose | 1 | - | 0.8V/µs | - | 800 kHz | 0.003 pA | 500 µV | 1mA | 12 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 16-PDIP |
|
OPA2211MDRGTEPIC OPAMP GP 2 CIRCUIT 8SON |
1,206 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 27V/µs | 80 MHz | - | 50 nA | 50 µV | 3.6mA (x2 Channels) | 45 mA | 4.5 V | 36 V | -55°C ~ 125°C (TJ) | - | - | Surface Mount | 8-SON (3x3) |
|
ISO121GIC OPAMP ISOLATION 1 CIRC 16CDIP |
2,906 | - |
|
Datasheet | - | 40-CDIP (0.600", 15.24mm), 16 Leads | Tube | Active | Isolation | 1 | - | 2V/µs | - | 60 kHz | - | 10 mV | 4mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
OPA2541SMIC OPAMP GP 2 CIRCUIT TO3-8 |
3,354 | - |
|
Datasheet | - | TO-3-8 | Tube | Active | General Purpose | 2 | - | 8V/µs | 1.6 MHz | - | 15 pA | 1 mV | 40mA (x2 Channels) | 7 A | 20 V | 80 V | -55°C ~ 125°C | - | - | Through Hole | TO-3-8 |
|
TL061IDRIC OPAMP JFET 1 CIRCUIT 8SOIC |
532 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA | - | 7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LP358DRIC OPAMP GP 2 CIRCUIT 8SOIC |
380 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.05V/µs | 100 kHz | - | 2 nA | 2 mV | 54µA (x2 Channels) | 10 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LP324NIC OPAMP GP 4 CIRCUIT 14DIP |
531 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | - | 0.05V/µs | 100 kHz | - | 2 nA | 2 mV | 150µA | 10 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
TL064ACNIC OPAMP JFET 4 CIRCUIT 14DIP |
647 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 4 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x4 Channels) | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
OPA337NA/250IC OPAMP GP 1 CIRCUIT SOT23-5 |
1,225 | - |
|
Datasheet | MicroAmplifier™ | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1.2V/µs | 3 MHz | - | 0.2 pA | 500 µV | 525µA | 9 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
