Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6882SQE/NOPBIC OPAMP DIFF 2 CIRCUIT 36WQFN |
4,184 | - |
|
Datasheet | LMH® | 36-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Programmable Gain, Differential | 2 | Differential | 6000V/µs | - | 2.4 GHz | - | - | 200mA | - | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 36-WQFN (6x6) |
|
PGA203KPIC INST AMP 1 CIRCUIT 14DIP |
4,989 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 20V/µs | - | 1 MHz | 10 pA | 500 µV | 6.5mA | 10 mA | 12 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LF256H/NOPBIC OPAMP JFET 1 CIRCUIT TO99-8 |
4,459 | - |
|
Datasheet | BI-FET™ | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 12V/µs | 5 MHz | - | 30 pA | 3 mV | 5mA | - | 10 V | 44 V | -25°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
THS4521SHKJIC OPAMP DIFF 1 CIRCUIT 8CFP |
3,937 | - |
|
Datasheet | - | 8-CFlatPack | Bulk | Active | Differential | 1 | Differential, Rail-to-Rail | 422.5V/µs | 81 MHz | 104.3 MHz | 750 nA | 100 µV | 1mA | 35 mA | 2.5 V | 3.6 V | -55°C ~ 210°C | - | - | Surface Mount | 8-CFP |
|
OPA211SHKQIC OPAMP GP 1 CIRCUIT 8CFP |
3,585 | - |
|
Datasheet | - | 8-CSOIC (0.220", 5.65mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 27V/µs | 80 MHz | - | 60 nA | 30 µV | 3.6mA | 30 mA | 4.5 V | 36 V | -55°C ~ 210°C | - | - | Surface Mount | 8-CFP |
|
LM2904BAQPWRQ1AUTOMOTIVE-GRADE, DUAL, 36-V, 1. |
719 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Push-Pull | 0.5V/µs | 1.2 MHz | - | 10 nA | 2 mV | 300µA (x2 Channels) | 30 mA | 3 V | 36 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
LM2904VQDRG4Q1IC OPAMP GP 2 CIRCUIT 8SOIC |
728 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
INA2180A4IDSGRIC CURRENT SENSE 2 CIRCUIT 8WSON |
730 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Current Sense | 2 | Rail-to-Rail | 2V/µs | - | 105 kHz | 80 µA | 100 µV | 355µA | - | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-WSON (2x2) |
|
INA2180A4IDGKRIC CURR SENSE 2 CIRCUIT 8VSSOP |
274 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 2 | Rail-to-Rail | 2V/µs | - | 105 kHz | 80 µA | 100 µV | 355µA | - | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
TLV2362IPWRIC OPAMP GP 2 CIRCUIT 8TSSOP |
458 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 3V/µs | 7 MHz | - | 20 nA | 1 mV | 1.75mA (x2 Channels) | 20 mA | 2 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
