Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SHC702JMSAMPLE AND HOLD 1-CH 0.6US |
3,912 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
OPA2541SMQIC OPAMP GP 2 CIRCUIT TO3-8 |
1,011 | - |
|
Datasheet | - | TO-3-8 | Bulk | Active | General Purpose | 2 | - | 8V/µs | 1.6 MHz | - | 15 pA | 1 mV | 40mA (x2 Channels) | 7 A | 20 V | 80 V | -55°C ~ 125°C | - | - | Through Hole | TO-3-8 |
|
3650KGIC OPAMP ISOLATION 1 CIRC 32CDIP |
3,073 | - |
|
Datasheet | - | 32-CDIP (0.900", 22.86mm) | Tube | Obsolete | Isolation | 1 | - | 1.2V/µs | - | 15 kHz | 10 nA | 500 µV | 2.3mA | 5 mA | 16 V | 36 V | 0°C ~ 85°C | - | - | Through Hole | 32-CDIP |
|
5962-0722301VFAIC OPAMP DIFF 1 CIRCUIT 16CFP |
4,360 | - |
|
Datasheet | - | 16-CFlatPack | Bulk | Active | Differential | 1 | Differential | 5100V/µs | 3 GHz | 250 MHz | 8 µA | 1 mV | 37.7mA | 96 mA | 3 V | 5 V | -55°C ~ 125°C | - | - | Surface Mount | 16-CFP |
|
INA4180A1QPWRQ1INA4180-Q1 AUTOMOTIVE, QUAD-CHAN |
973 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | Current Sense | 4 | Rail-to-Rail | 2V/µs | 350 kHz | 350 kHz | 100 nA | 100 µV | - | 8 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
TL064BCNE4TL064B QUAD LOW-POWER JFET-INPUT |
975 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 3.5V/µs | 1 MHz | - | 30 pA | 2 mV | 200µA (x4 Channels) | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
OPA2314AQDRQ1OPA2314-Q1 - AUTOMOTIVE 1.8V, 3M |
380 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 1.5V/µs | 3 MHz | - | 2 pA | 500 µV | 150µA (x2 Channels) | 20 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
LMH6503MTLMH6503 WIDEBAND, LOW POWER, LIN |
4,086 | - |
|
Datasheet | LMH® | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | Variable Gain | 1 | - | 1800V/µs | - | 135 MHz | 11 µA | - | 37mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
5962-9751401Q2AIC OPAMP GP 2 CIRCUIT 20LCCC |
2,872 | - |
|
Datasheet | LinCMOS™ | 20-CLCC | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.02V/µs | 5.3 MHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
77043012AIC OPAMP GP 4 CIRCUIT 20LCCC |
3,353 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 4 | Differential | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 30 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
