Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-9321604QHAIC OPAMP GP 2 CIRCUIT 10CFP |
2,239 | - |
|
Datasheet | Excalibur™ | 10-CDFF | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 275 µV | 6.9mA (x4 Channels) | 50 mA | 4 V | 44 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-CFP |
|
5962-9460203QCAIC OPAMP JFET 4 CIRCUIT 14CDIP |
2,931 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 40V/µs | 10 MHz | - | 20 pA | 490 µV | 3.1mA (x4 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
|
TLE2074MJBIC OPAMP JFET 4 CIRCUIT 14CDIP |
4,057 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 40V/µs | 10 MHz | - | 20 pA | 490 µV | 3.1mA (x4 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
5962-9760301Q2AIC OPAMP GP 2 CIRCUIT 20LCCC |
4,734 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 2 | - | 0.5V/µs | 1 MHz | - | 80 nA | 1 mV | 3.4mA (x2 Channels) | 25 mA | 10 V | 30 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
TLC2202MFKBIC CMOS 2 CIRCUIT 20LCCC |
4,980 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | CMOS | 2 | Rail-to-Rail | 2.9V/µs | 1.9 MHz | - | 4 µA | 2 mV | 5.6mA (x2 Channels) | 50 mA | 4.6 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
5962-0051203QHAIC OPAMP GP 1 CIRCUIT 10CFP |
3,199 | - |
|
Datasheet | - | 10-CDFF | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-CFP |
|
5962-9089504QPAIC OPAMP ZER-DRIFT 1CIRC 8CDIP |
3,473 | - |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Chopper (Zero-Drift) | 1 | - | 3.7V/µs | 1.9 MHz | - | 50 pA | 4 µV | 1.5mA | 50 mA | 4.6 V | 16 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
|
TLC2274MFKBIC OPAMP GP 4 CIRCUIT 20LCCC |
2,787 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
5962-9550403QHAIC CMOS 2 CIRCUIT 10CFP |
4,563 | - |
|
Datasheet | LinCMOS™ | 10-CDFF | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.55V/µs | 710 kHz | - | 1 pA | 300 µV | 400µA (x2 Channels) | 50 mA | 2.7 V | 8 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-CFP |
|
|
TLC2274AMJBIC OPAMP GP 4 CIRCUIT 14CDIP |
1,096 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 14-CDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
