Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA121PIC INST AMP 1 CIRCUIT 8DIP |
2,527 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 0.7V/µs | - | 600 kHz | 4 pA | 200 µV | 450µA | 14 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LMH6503MT/NOPBIC VARIABLE GAIN 1 CIRC 14TSSOP |
1,112 | - |
|
Datasheet | LMH® | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | Variable Gain | 1 | - | 1800V/µs | - | 135 MHz | 11 µA | - | 37mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
OPA593DNTT85-V, 100-UV WIDE-BANDWIDTH (10 |
2,465 | - |
|
Datasheet | - | 12-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Power | 1 | Push-Pull, Rail-to-Rail | 45V/µs | 10 MHz | - | 1 pA | 20 µV | 3.25mA | 250 mA | 8 V | 85 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 12-WSON (4x4) |
|
OPA4228PAIC OPAMP GP 4 CIRCUIT 14DIP |
4,207 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | - | 11V/µs | 33 MHz | - | 2.5 nA | 10 µV | 3.7mA (x4 Channels) | 45 mA | 5 V | 36 V | -55°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LM2904VQDRIC OPAMP GP 2 CIRCUIT 8SOIC |
1,607 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 40 mA | 3 V | 30 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LM2904VQPWRG4Q1IC OPAMP GP 2 CIRCUIT 8TSSOP |
1,413 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
OPA2348AIDGKIC CMOS 2 CIRCUIT 8VSSOP |
3,781 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.5V/µs | 1 MHz | - | 0.5 pA | 1 mV | 45µA (x2 Channels) | 10 mA | 2.1 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
LMV712TLX/NOPBIC OPAMP GP 2 CIRCUIT 10DSBGA |
4,454 | - |
|
Datasheet | LMV® | 10-WFBGA, DSBGA | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 5V/µs | 5 MHz | - | 5.5 pA | 400 µV | 1.22mA (x2 Channels) | 50 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DSBGA |
|
|
TLC071CDIC OPAMP GP 1 CIRCUIT 8SOIC |
1,883 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 19V/µs | 10 MHz | - | 1.5 pA | 390 µV | 2.1mA | 57 mA | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
LMV722M/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
3,062 | - |
|
Datasheet | LMV® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 5.25V/µs | 10 MHz | - | 260 nA | 80 µV | 2.01mA (x2 Channels) | 52.6 mA | 2.2 V | 5.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
