Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2277PIC OPAMP GP 2 CIRCUIT 8DIP |
2,418 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | - | 0.8V/µs | 1 MHz | - | 500 pA | 10 µV | 790µA (x2 Channels) | 35 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LM6171BIN/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8DIP |
4,393 | - |
|
Datasheet | VIP™ III | 8-DIP (0.300", 7.62mm) | Tube | Active | Voltage Feedback | 1 | - | 3600V/µs | 100 MHz | 160 MHz | 1 µA | 1.5 mV | 2.5mA | 116 mA | 5.5 V | 34 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA2211AIDRGTIC OPAMP GP 2 CIRCUIT 8SON |
1,842 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 27V/µs | 80 MHz | - | 60 nA | 30 µV | 3.6mA (x2 Channels) | 45 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SON (3x3) |
|
THS3092DIC OPAMP CFA 2 CIRCUIT 8SOIC |
2,458 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 2 | - | 5700V/µs | 145 MHz | 160 MHz | 4 µA | 900 µV | 9.5mA (x2 Channels) | 280 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2227MDREPIC OPAMP GP 2 CIRCUIT 8SOIC |
2,700 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 2.3V/µs | 8 MHz | - | 2.5 nA | 5 µV | 3.7mA (x2 Channels) | 45 mA | 5 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
ISO122UIC OPAMP ISOLATION 1 CIRC 8SOIC |
4,536 | - |
|
Datasheet | - | 28-SOIC (0.295", 7.50mm Width), 8 Leads | Tube | Active | Isolation | 1 | - | 2V/µs | - | 50 kHz | - | 20 mV | 5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2333SHKJIC OPAMP ZERO-DRIFT 2 CIRC 8CFP |
2,174 | - |
|
Datasheet | Zero-Drift | 8-CFlatPack | Tube | Active | CMOS, Zero-Drift | 2 | Rail-to-Rail | 0.16V/µs | 350 kHz | - | 70 pA | 2 µV | 17µA (x2 Channels) | 5 mA | 1.8 V | 5.5 V | -55°C ~ 210°C | - | - | Surface Mount | 8-CFP |
|
ISO121BGIC OPAMP ISOLATION 1 CIRC 16CDIP |
2,298 | - |
|
Datasheet | - | 40-CDIP (0.600", 15.24mm), 16 Leads | Tube | Active | Isolation | 1 | - | 2V/µs | - | 60 kHz | - | 5 mV | 4mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
LM358PWRIC OPAMP GP 2 CIRCUIT 8TSSOP |
4,882 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 40 mA | 3 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
|
TL081CPIC OPAMP JFET 1 CIRCUIT 8DIP |
2,939 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 1 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA | - | 7 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
