Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1014DIDWIC OPAMP GP 4 CIRCUIT 16SOIC |
1,437 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | General Purpose | 4 | - | 0.4V/µs | 1 MHz | - | 12 nA | 60 µV | 350µA (x4 Channels) | 25 mA | 4 V | 30 V | -40°C ~ 105°C | - | - | Surface Mount | 16-SOIC |
|
OPA4340UA/2K5IC CMOS 4 CIRCUIT 14SOIC |
4,394 | - |
|
Datasheet | microPOWER™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 150 µV | 750µA (x4 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA4340EA/2K5IC CMOS 4 CIRCUIT 16SSOP |
1,280 | - |
|
Datasheet | microPOWER™ | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 150 µV | 750µA (x4 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
OPA2613IDIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
484 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 2 | - | 70V/µs | 125 MHz | 230 MHz | 6 µA | 200 µV | 12mA (x2 Channels) | 350 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2690IDIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
195 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 2 | - | 1800V/µs | 300 MHz | 500 MHz | 5 µA | 1 mV | 11mA (x2 Channels) | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
INA217AIDWRIC INST AMP 1 CIRCUIT 16SOIC |
1,881 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 15V/µs | - | 3.4 MHz | 2 µA | 50 µV | 10mA | 60 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
OPA2735AIDGKTIC OPAMP ZERO-DRIFT 2CIRC 8VSSOP |
7,630 | - |
|
Datasheet | Zero-Drift | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 2 | Differential, Rail-to-Rail | 1.5V/µs | 1.6 MHz | - | 100 pA | 1 µV | 600µA (x2 Channels) | 20 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
OPA699IDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
443 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 1400V/µs | 1 GHz | 260 MHz | 3 µA | 1.5 mV | 15.5mA | 120 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA277U/2K5IC OPAMP GP 1 CIRCUIT 8SOIC |
5,205 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | - | 0.8V/µs | 1 MHz | - | 500 pA | 10 µV | 790µA | 35 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LM7372MRX/NOPBIC OPAMP VFB 2 CIRCUIT 8SOPWRPAD |
1,793 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 3000V/µs | 120 MHz | 220 MHz | 2.7 µA | 2 mV | 13mA (x2 Channels) | 260 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
