Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4520RGTTIC OPAMP DIFF 1 CIRCUIT 16VQFN |
1,147 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential, Rail-to-Rail | 570V/µs | 1.2 GHz | 620 MHz | 6.5 µA | 250 µV | 14.2mA | 105 mA | 3 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
OPA1622IDRCTIC AUDIO 2 CIRCUIT 10VSON |
152 | - |
|
Datasheet | SoundPlus™ | 10-VFDFN Exposed Pad | Tape & Reel (TR) | Active | Audio | 2 | - | 10V/µs | 32 MHz | - | 1.2 µA | 100 µV | 2.6mA (x2 Channels) | 145 mA | 4 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 10-VSON (3x3) |
|
OPA551FA/500IC OPAMP GP 1 CIRC DDPAK/TO263-7 |
1,890 | - |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tape & Reel (TR) | Active | General Purpose | 1 | - | 15V/µs | 3 MHz | - | 20 pA | 1 mV | 7mA | 200 mA | 8 V | 60 V | -40°C ~ 125°C | - | - | Surface Mount | TO-263 (DDPAK-7) |
|
LM4562NA/NOPBIC AUDIO 2 CIRCUIT 8DIP |
1,131 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Audio | 2 | - | 20V/µs | 55 MHz | - | 10 nA | 100 µV | 10mA (x2 Channels) | 26 mA | 5 V | 34 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA2130UAIC OPAMP JFET 2 CIRCUIT 8SOIC |
553 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 2 | - | 2V/µs | 1 MHz | - | 5 pA | 200 µV | 530µA (x2 Channels) | 18 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
INA149AIDIC OPAMP DIFF 1 CIRCUIT 8SOIC |
442 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Differential | 1 | - | 5V/µs | - | 500 kHz | - | 350 µV | 810µA | 25 mA | 4 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA857IRGTTIC OPAMP GP 1 CIRCUIT 16VQFN |
1,183 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Transimpedance | 1 | - | 220V/µs | - | 130 MHz | 1 µA | - | 23.4mA | - | 2.6 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
OPA847IDBVTIC OPAMP VFB 1 CIRCUIT SOT23-6 |
135 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 950V/µs | 3.9 GHz | - | 19 µA | 100 µV | 18.1mA | 100 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
OPA4340EA/250IC CMOS 4 CIRCUIT 16SSOP |
327 | - |
|
Datasheet | microPOWER™ | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 150 µV | 750µA (x4 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
|
INA121PAIC INST AMP 1 CIRCUIT 8DIP |
295 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 0.7V/µs | - | 600 kHz | 4 pA | 300 µV | 450µA | 14 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
