Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA2181A2QDGSRQ1IC CURR SENSE 2 CIRCUIT 10VSSOP |
1,128 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 2 | Rail-to-Rail | 2V/µs | 210 kHz | 210 kHz | 75 µA | 100 µV | 356µA | - | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-VSSOP |
|
LMV824MTIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,841 | - |
|
Datasheet | LMV® | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 2V/µs | 5.6 MHz | - | 40 nA | 1 mV | 1mA (x4 Channels) | 45 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
OPA727AIDGKRG4IC OPAMP GP 1 CIRCUIT 8VSSOP |
4,820 | - |
|
Datasheet | e-trim™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | Rail-to-Rail | 30V/µs | 20 MHz | - | 85 pA | 15 µV | 4.3mA | 40 mA | 4 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
TLC27L2ACDG4IC CMOS 2 CIRCUIT 8SOIC |
1,646 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | CMOS | 2 | - | 0.03V/µs | 110 kHz | - | 0.6 pA | 900 µV | 20µA (x2 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LM837N/NOPBIC OPAMP GP 4 CIRCUIT 14DIP |
4,771 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 10V/µs | 25 MHz | - | 500 nA | 300 µV | 10mA (x4 Channels) | 40 mA | 30 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
TL3474AIDG4IC OPAMP GP 4 CIRCUIT 14SOIC |
1,917 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 13V/µs | 4 MHz | - | 100 nA | 1 mV | 3.5mA (x4 Channels) | 34 mA | 4 V | 36 V | -40°C ~ 105°C | - | - | Surface Mount | 14-SOIC |
|
|
OPA2338UA/2K5G4IC CMOS 2 CIRCUIT 8SOIC |
2,274 | - |
|
Datasheet | MicroAmplifier™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 4.6V/µs | 12.5 MHz | - | 0.2 pA | 500 µV | 525µA (x2 Channels) | 9 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LP2902PWRIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,280 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.05V/µs | 100 kHz | - | 2 nA | 2 mV | 85µA (x4 Channels) | 10 mA | 3 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
|
TL052CDIC OPAMP JFET 2 CIRCUIT 8SOIC |
1,712 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 20.7V/µs | 3 MHz | - | 30 pA | 650 µV | 4.8mA (x2 Channels) | 80 mA | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA237NA/3KG4IC OPAMP GP 1 CIRCUIT SOT23-5 |
4,685 | - |
|
Datasheet | MicroAmplifier™ | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 0.5V/µs | 1.5 MHz | - | 8.5 nA | 350 µV | 200µA | 8 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
