Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6647MFXIC OPAMP VFB 1 CIRCUIT SOT23-6 |
4,090 | - |
|
Datasheet | VIP10™ | SOT-23-6 | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | Push-Pull, Rail-to-Rail | 22V/µs | - | 55 MHz | 650 nA | 1 mV | 725µA | 20 mA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
|
LMV118MFXIC OPAMP VFB 1 CIRCUIT SOT23-6 |
1,394 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | Push-Pull, Rail-to-Rail | 35V/µs | - | 45 MHz | 400 nA | 1 mV | 600µA | 20 mA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
TLV9154IDYYRMEMORY |
3,337 | - |
|
Datasheet | - | SOT-23-14 Thin, SOT-23 Variant | Bulk | Active | General Purpose | 4 | Push-Pull, Rail-to-Rail | 21V/µs | 4.5 MHz | - | 10 pA | 125 µV | 560µA (x4 Channels) | 75 mA | 2.7 V | 16 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOT-23-THIN |
|
LMH6658MMX/NOPBIC OPAMP VFB 2 CIRCUIT 8VSSOP |
2,572 | - |
|
Datasheet | LMH® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 700V/µs | 140 MHz | 270 MHz | 5 µA | 1 mV | 6.5mA (x2 Channels) | 110 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLV2371IDG4IC OPAMP GP 1 CIRCUIT 8SOIC |
1,852 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 2.1V/µs | 3 MHz | - | 1 pA | 2 mV | 750µA | 16 mA | 2.7 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMC6035IMIC CMOS 2 CIRCUIT 8SOIC |
4,543 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | Differential, Rail-to-Rail | 1.5V/µs | 1.4 MHz | - | 0.02 pA | 500 µV | 650µA (x2 Channels) | 8 mA | 2 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLC2274CNSR-AIC OPAMP GP 4 CIRCUIT 14SO |
1,407 | - |
|
Datasheet | - | 14-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 4.8mA (x4 Channels) | 50 mA | 4.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SO |
|
TLV2371IDBVTG4IC OPAMP GP 1 CIRCUIT SOT23-5 |
3,501 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 2.1V/µs | 3 MHz | - | 1 pA | 2 mV | 750µA | 16 mA | 2.7 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
TLV2362IDGKRIC OPAMP GP 2 CIRCUIT 8VSSOP |
3,713 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 3V/µs | 7 MHz | - | 20 nA | 1 mV | 1.75mA (x2 Channels) | 20 mA | 2 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLC27L4IPWIC CMOS 4 CIRCUIT 14TSSOP |
3,831 | - |
|
Datasheet | LinCMOS™ | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | CMOS | 4 | - | 0.05V/µs | 110 kHz | - | 0.7 pA | 1.1 mV | 57µA (x4 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
