Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA125PIC INST AMP 1 CIRCUIT 16DIP |
322 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 0.2V/µs | - | 150 kHz | 10 nA | 50 µV | 460µA | 12 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 16-PDIP |
|
TLV2462AMDREPIC OPAMP GP 2 CIRCUIT 8SOIC |
1,287 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 150 µV | 550µA (x2 Channels) | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA4209AIPWIC OPAMP GP 4 CIRCUIT 14TSSOP |
783 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 6.4V/µs | 18 MHz | - | 1 nA | 35 µV | 2.2mA (x4 Channels) | 65 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
PGA280AIPWIC OPAMP PGA 1 CIRCUIT 24TSSOP |
2,643 | - |
|
Datasheet | - | 24-TSSOP (0.173", 4.40mm Width) | Tube | Active | Programmable Gain | 1 | Differential | 2V/µs | 6 MHz | - | 800 pA | 50 µV | 2.4mA | 15 mA | 10 V | 36 V | -40°C ~ 105°C | - | - | Surface Mount | 24-TSSOP |
|
OPA552FAKTWTIC OPAMP GP 1 CIRC DDPAK/TO263-7 |
823 | - |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tape & Reel (TR) | Active | General Purpose | 1 | - | 24V/µs | 12 MHz | - | 20 pA | 1 mV | 7mA | 200 mA | 8 V | 60 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | TO-263 (DDPAK-7) |
|
THS4082IDGNRIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
522 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 230V/µs | - | 175 MHz | 1.2 µA | 1 mV | 3.4mA (x2 Channels) | 85 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
BUF602IDBVTIC BUFFER 1 CIRCUIT SOT23-5 |
1,907 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Buffer | 1 | - | 8000V/µs | 1 GHz | - | 3 µA | 16 mV | 5.8mA | 60 mA | 2.8 V | 12.6 V | -45°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
LM4562MA/NOPBIC AUDIO 2 CIRCUIT 8SOIC |
2,562 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Audio | 2 | - | 20V/µs | 55 MHz | - | 10 nA | 100 µV | 10mA (x2 Channels) | 26 mA | 5 V | 34 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA132UIC OPAMP GP 1 CIRCUIT 8SOIC |
372 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 20V/µs | 8 MHz | - | 5 pA | 250 µV | 4mA | 40 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA3S328YBJRHIGH-SPEED (40 MHZ) HIGH-PRECISI |
1,758 | - |
|
Datasheet | - | 24-XFBGA, DSBGA | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 30V/µs | 40 MHz | 350 MHz | 0.2 pA | 10 µV | 3.8mA (x2 Channels) | 68 mA | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 24-DSBGA (2x2) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
