Instrumentation, Op Amps, Buffer Amps
Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMC6462BIN/NOPBLMC6462 DUAL MICROPOWER, RAIL-TO |
3,394 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.028V/µs | 50 kHz | - | 0.15 pA | 250 µV | 50µA (x2 Channels) | 75 mA | 3 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-PDIP |
|
LT1672CS8#PBFLT1672 - PRECISION RAIL-TO-RAIL |
200 | - |
|
Datasheet | Over-The-Top® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA | 1.5 mA | 2.2 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
OPA2695IDROPA2695 - ULTRA-WIDEBAND, CURREN |
3,670 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
LMH6702MALMH6702 1.7 GHZ, ULTRA LOW DISTO |
14,734 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LTC6102HVCDD#PBFPRECISION ZERO DRIFT CURRENT SEN |
544 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Bulk | Active | Current Sense | 1 | - | - | 200 kHz | - | 60 pA | 3 µV | 420µA | 1 mA | 5 V | 100 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
|
HA1-2405-7OPERATIONAL AMPLIFIER, 1 FUNC, 1 |
1,794 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
EL8302IUZ-T13IC OPAMP GP 3 CIRCUIT 16QSOP |
25,000 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 3 | Rail-to-Rail | 600V/µs | 200 MHz | 500 MHz | 6 µA | 800 µV | 5.6mA (x3 Channels) | 65 mA | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
|
EL8302IUZ-T13IC OPAMP GP 3 CIRCUIT 16QSOP |
20,000 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 3 | Rail-to-Rail | 600V/µs | 200 MHz | 500 MHz | 6 µA | 800 µV | 5.6mA (x3 Channels) | 65 mA | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
LT1991IDD#TRPBFLT1991 - PRECISION DIFFERENCE AM |
6,554 | - |
|
Datasheet | - | 10-WFDFN Exposed Pad | Bulk | Obsolete | Programmable Gain | 1 | - | 0.12V/µs | 560 kHz | 110 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
|
LT1996IDD#PBFLT1996 - PRECISION, 100UA GAIN S |
1,210 | - |
|
Datasheet | * | 10-WFDFN Exposed Pad | Bulk | Obsolete | Programmable Gain | 1 | - | 0.12V/µs | 560 kHz | 38 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
|
EL5364IUZ-T7IC OPAMP CFA 3 CIRCUIT 16QSOP |
2,000 | - |
|
Datasheet | EL5364 | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 3 | - | 4200V/µs | - | 600 MHz | 2 µA | 1.5 mV | 3.5mA (x3 Channels) | 140 mA | 5 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-QSOP |
|
OP15FN8#PBFOP15 - HIGH PERF JFET OP AMP |
950 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 11V/µs | 5.7 kHz | - | 30 pA | 400 µV | 2.7mA | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT6010ACDD#PBFLT6010 - RAIL-TO-RAIL OUTPUT PRE |
363 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.11V/µs | 350 kHz | - | 2 nA | 20 µV | 260µA | 20 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LMH6732MFX/NOPBIC OPAMP CFA 1 CIRCUIT SOT23-6 |
3,000 | - |
|
Datasheet | - | SOT-23-6 | Bulk | Active | Current Feedback | 1 | - | 2700V/µs | - | 540 MHz | 2 µA | 3 mV | 9mA | 115 mA | 9 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
LT1192CN8#PBFLT1192 - ULTRA HIGH SPEED OA(AV= |
950 | - |
|
Datasheet | * | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | - | 450V/µs | 350 MHz | - | 500 nA | 200 µV | 32mA | 50 mA | - | - | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LMH6550MA/NOPBLMH6550 400MHZ, DIFFERENTIAL, HI |
2,887 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | Differential | 3000V/µs | - | 400 MHz | 8 µA | 1 mV | 20mA | 75 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2228PAOPA2228 DUAL, WIDE BANDWIDTH, HI |
130 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 11V/µs | 33 MHz | - | 2.5 nA | 10 µV | 3.7mA (x2 Channels) | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OP420HYGeneral Purpose Operational Ampl |
2,261 | - |
|
Datasheet | - | - | Tube | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
OPA2251PAOPA2251 DUAL, 15V SINGLE-SUPPLY, |
133 | - |
|
Datasheet | microPOWER™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 20 nA | 100 µV | 27µA (x2 Channels) | 50 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LM6142BIMLM6142 DUAL HIGH SPEED/LOW POWER |
310 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x2 Channels) | 24 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.
What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.
