Instrumentation, Op Amps, Buffer Amps
Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS3201DGNTHS3201 1.8GHZ CURRENT FEEDBACK |
315 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
OP07EZOP07 - OPERATIONAL AMPLIFIER, 1 |
273 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.3V/µs | 600 kHz | - | 1 nA | 30 µV | - | - | 6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-CERDIP |
|
LM6144BIMLM6144 QUAD HIGH SPEED/LOW POWER |
13,254 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x4 Channels) | 22 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
HA4P5033-5BUFFER AMPLIFIER, BIPOLAR, PQCC2 |
1,434 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
5962-9751402QPAIC OPAMP GP 2 CIRCUIT 8CDIP |
273 | - |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.02V/µs | 5.3 MHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
LT1078ISW#PBFLT1078 - UP PREC DUAL OP AMP |
1,269 | - |
|
Datasheet | LT® | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | General Purpose | 2 | - | 0.1V/µs | 200 kHz | - | 6 nA | 70 µV | 47µA (x2 Channels) | - | 2.2 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SO |
|
LM201AHIC OPAMP GP 1 CIRCUIT TO99-8 |
2,973 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 0.5V/µs | 1 MHz | - | 30 nA | 700 µV | 1.8mA | - | 10 V | 44 V | -25°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
OPA643N/250OPERATIONAL AMPLIFIER, 1 FUNC, 4 |
500 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | Voltage Feedback | 1 | - | 1000V/µs | 800 MHz | - | 19 µA | 2.5 mV | 20mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
LTC2051IMS10LTC2051 - DUAL ZERO-DRIFT O |
550 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Chopper (Zero-Drift) | 2 | - | 2V/µs | 3 MHz | - | 90 pA | 1 µV | 1mA (x2 Channels) | - | 2.7 V | - | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
LM158AHLM158-N LOW POWER DUAL OPERATION |
635 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 2 | - | - | 1 MHz | - | 40 nA | 2 mV | 1mA | 40 mA | 3 V | 32 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | TO-99-8 |
|
LT1356CNLT1356 - OP AMP VOLTAGE FEEDBACK |
600 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | Voltage Feedback | 4 | - | 400V/µs | 12 MHz | - | 80 nA | 300 µV | 1mA (x4 Channels) | 30 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
LM301AHLM301A-N-MIL OPERATIONAL AMPLIFI |
294 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 0.5V/µs | 1 MHz | - | 70 nA | 2 mV | 1.8mA | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
LM224JLM224-N LOW POWER QUAD OPERATION |
6,371 | - |
|
Datasheet | LinCMOS™ | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | - | 1 MHz | - | 45 nA | 2 mV | 1.5mA | 40 mA | 3 V | 32 V | -25°C ~ 85°C (TJ) | - | - | Through Hole | 14-CDIP |
|
|
LF412MH/NOPBLF412-N-MIL LOW OFFSET, LOW DRIF |
534 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 15V/µs | 4 MHz | - | 50 pA | 1 mV | 3.6mA (x2 Channels) | - | 10 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
|
ISL55004IBZVOLTAGE FEEDBACK AMPLIFIER 4 CIR |
3,245 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 4 | - | 300V/µs | 70 MHz | 200 MHz | 600 nA | 1.2 mV | 8.5mA (x4 Channels) | 140 mA | 4.5 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
LM258HIC OPAMP GP 2 CIRCUIT TO99-8 |
1,724 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 2 | - | - | 1 MHz | - | 45 nA | 2 mV | 1mA | 40 mA | 3 V | 32 V | -25°C ~ 85°C | Automotive | AEC-Q100 | Through Hole | TO-99-8 |
|
|
LF198H/NOPBIC SAMPL/HOLD 1 CIRCUIT TO99-8 |
5,877 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Sample and Hold | 1 | - | - | - | - | 5 nA | 1 mV | 4.5mA | - | 10 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
|
LF198H/NOPBLF198-N MONOLITHIC SAMPLE AND HO |
2,416 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Sample and Hold | 1 | - | - | - | - | 5 nA | 1 mV | 4.5mA | - | 10 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
OPA606KPOPA606 WIDE-BANDWIDTH DIFET OPER |
2,112 | - |
|
Datasheet | Difet® | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Differential | 30V/µs | 12 MHz | - | 8 pA | 300 µV | 6.5mA | 10 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT1112ACN8IC OPAMP GP 2 CIRCUIT 8DIP |
220 | - |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 0.3V/µs | 750 kHz | - | 70 pA | 20 µV | 350µA (x2 Channels) | - | 2 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.
What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.
