Instrumentation, Op Amps, Buffer Amps
Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD518SHIC OPAMP GP 1 CIRCUIT TO99 |
1,490 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 70V/µs | 12 MHz | - | 120 nA | 2 mV | 5µA | 10 mA | 10 V | 10 V | -55°C ~ 125°C | - | - | Through Hole | TO-99 |
|
HA4-5141/883IC POWER 1 CIRCUIT 20CLCC |
2,547 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | Power | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 20-CLCC (8.89x8.89) |
|
LT1230CN#PBFIC OPAMP CFA 4 CIRCUIT 14DIP |
4,764 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 4 | - | 700V/µs | 100 MHz | 100 MHz | 10 µA | 3 mV | 6mA (x4 Channels) | 125 mA | 4 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
_4040251^B.jpg "OPA548T-1G3")
|
OPA548T-1G3IC POWER 1 CIRCUIT TO220-7 |
2,479 | - |
|
Datasheet | - | TO-220-7 | Tube | Obsolete | Power | 1 | - | 10V/µs | 1 MHz | - | 100 nA | 2 mV | 17mA | 5 A | 8 V | 60 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-7 |
|
8102302HAIC OPAMP JFET 2 CIRCUIT 10CFP |
2,950 | - |
|
Datasheet | - | 10-CDFF | Bulk | Active | J-FET | 2 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x2 Channels) | - | 10 V | 30 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 10-CFP |
|
|
LT1024CN#PBFIC OPAMP GP 2 CIRCUIT 14DIP |
2,825 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 0.2V/µs | - | - | 30 pA | 20 µV | 380µA (x2 Channels) | - | 2.4 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
LT1230CS#PBFIC OPAMP CFA 4 CIRCUIT 14SO |
2,834 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 4 | - | 700V/µs | - | 100 MHz | 10 µA | 3 mV | 6mA (x4 Channels) | 125 mA | 4 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
LT1216CS#PBFIC OPAMP GP 4 CIRCUIT 16SO |
4,693 | - |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 50V/µs | 23 MHz | - | 420 nA | 250 µV | 4.75mA (x4 Channels) | 50 mA | 2.5 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
|
LT1024ACN#PBFIC OPAMP GP 2 CIRCUIT 14DIP |
1,963 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 0.2V/µs | - | - | 25 pA | 15 µV | 380µA (x2 Channels) | - | 2.4 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
CLC446AJ-QMLIC OPAMP CFA 1 CIRCUIT |
4,140 | - |
|
Datasheet | - | - | Bulk | Active | Current Feedback | 1 | - | 2000V/µs | - | 400 MHz | 10 µA | 2 mV | 4.8mA | 48 mA | 6 V | 6 V | -40°C ~ 85°C (TA) | - | - | - | - |
|
HA7-2720-8IC OPAMP GP 1 CIRCUIT 8CERDIP |
4,220 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | - | - | - | 8 nA | 2 mV | 210µA | 5 mA | 45 V | 45 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CERDIP |
_4040208^C.jpg "OPA544TG3")
|
OPA544TG3IC POWER 1 CIRCUIT TO220-5 |
4,400 | - |
|
Datasheet | - | TO-220-5 | Tube | Obsolete | Power | 1 | - | 8V/µs | 1.4 MHz | - | 15 pA | 1 mV | 12mA | 2 A | 20 V | 70 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-5 |
|
|
HA4-5135/883IC OPAMP GP 1 CIRCUIT 20CLCC |
3,524 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 1 | - | 0.5V/µs | 600 kHz | - | 4 nA | 75 µV | - | 15 mA | 30 V | 30 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (8.89x8.89) |
|
HA2-2500-2X114OPERATIONAL AMPLIFIER |
4,131 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
AD506KHIC OPAMP JFET 1 CIRCUIT TO99-8 |
2,931 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Through Hole | TO-99-8 |
|
|
LT1127ACN#PBFIC OPAMP GP 4 CIRCUIT 14DIP |
3,976 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 11V/µs | 65 MHz | - | 7 nA | 25 µV | 2.6mA (x4 Channels) | - | 8 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
|
TLC2201AMFKBIC CMOS 1 CIRCUIT 20LCCC |
4,672 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | CMOS | 1 | Rail-to-Rail | 2.7V/µs | 1.9 MHz | - | 1 pA | 100 µV | 1.1mA | 50 mA | 4.6 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
AD707TH/883BIC OPAMP GP 1 CIRCUIT TO99-8 |
4,578 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 0.3V/µs | 900 kHz | - | 1.5 nA | 10 µV | 2.5mA | 10 mA | 22 V | 22 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
|
5962-9080801M2AIC OPAMP JFET 2 CIRCUIT 20LCCC |
3,285 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | J-FET | 2 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 625µA (x2 Channels) | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
5962-9563901MGAIC OPAMP DIFF 1 CIRCUIT TO99-8 |
4,975 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Differential | 1 | - | 9.5V/µs | - | 3 MHz | - | 20 µV | 2.5mA | 45 mA | 12 V | 36 V | -55°C ~ 125°C | Military | MIL-STD-883 | Through Hole | TO-99-8 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.
What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.
