Instrumentation, Op Amps, Buffer Amps
Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD648THIC OPAMP JFET 2 CIRCUIT TO99-8 |
3,620 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 1.8V/µs | 1 MHz | 1 MHz | 3 pA | 300 µV | 340µA (x2 Channels) | 15 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
TLE2142AMJGIC OPAMP GP 2 CIRCUIT 8CDIP |
1,794 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 275 µV | 6.9mA (x2 Channels) | 50 mA | 4 V | 44 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
LT1209CS#PBFIC OPAMP GP 4 CIRCUIT 16SO |
2,739 | - |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 400V/µs | 45 MHz | - | 4 µA | 1 mV | 7mA (x4 Channels) | 40 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
OP10BICYIC INST AMP 2 CIRCUIT 14CERDIP |
2,134 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 2 | - | 0.17V/µs | - | - | 1 nA | 200 µV | - | - | 6 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 14-CERDIP |
|
BUF03BIFJIC BUFFER 1 CIRCUIT TO99-8 |
1,190 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Buffer | 1 | - | 250V/µs | 50 MHz | - | 180 pA | 4 mV | 19mA | 100 mA | 36 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
THS3112IDIC OPAMP CFA 2 CIRCUIT 8SOIC |
100 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 2 | - | 1550V/µs | - | 110 MHz | 330 nA | 3 mV | 4.9mA (x2 Channels) | 270 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLE2064MWBIC OPAMP JFET 4 CIRCUIT 14CFP |
2,348 | - |
|
Datasheet | - | 14-CFlatPack | Bulk | Active | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-CFP |
|
OP64ARC/883CIC OPAMP GP 1 CIRCUIT 20CLCC |
2,915 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 1 | - | 170V/µs | 80 MHz | 2.7 MHz | 200 nA | 400 µV | 6.2mA | 80 mA | 10 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
AD8264ACPZ-R7IC VARIABLE GAIN 4 CIRC 40LFCSP |
2,804 | - |
|
Datasheet | - | 40-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Variable Gain | 4 | Differential | 380V/µs | - | 235 MHz | 5 µA | - | 99mA | - | 4.5 V | 10 V | -40°C ~ 105°C | - | - | Surface Mount | 40-LFCSP-WQ (6x6) |
|
HA2-2700R2859OPERATIONAL AMPLIFIER |
3,713 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
AD515JH/+IC OPAMP JFET 1 CIRCUIT TO99-8 |
2,019 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | - | - | - | - | - | - | - | 10 V | 40 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
|
5962-89783012AIC OPAMP GP 2 CIRCUIT 20CLCC |
4,033 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 2 | - | - | - | - | 4.2 nA | 80 µV | 38µA | - | 1.6 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
OPA541APG3IC POWER 1 CIRCUIT TO220-11 |
1,909 | - |
|
Datasheet | - | TO-220-11 Formed Leads | Tube | Obsolete | Power | 1 | - | 10V/µs | 1.6 MHz | - | 4 pA | 2 mV | 20mA | 10 A | 20 V | 70 V | -25°C ~ 85°C | - | - | Through Hole | TO-220-11 |
|
AD600JRIC VARIABLE GAIN 2 CIRC 16SOIC |
4,807 | - |
|
Datasheet | X-AMP® | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | Variable Gain | 2 | - | 275V/µs | - | 35 MHz | 350 nA | - | 11mA (x2 Channels) | 50 mA | 9.5 V | 10.5 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
OPA549SG3IC OPAMP POWER 1 CIRC 11PWRPACK |
1,220 | - |
|
Datasheet | - | TO-220-11, Power Package | Tube | Obsolete | Power | 1 | - | 9V/µs | 900 kHz | - | 100 nA | 1 mV | 26mA | 10 A | 8 V | 60 V | -40°C ~ 85°C | - | - | Through Hole | 11-Power Package |
|
|
HA2-2510-8IC OPAMP GP 1 CIRCUIT TO99-8 |
4,080 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Through Hole | TO-99-8 |
|
5962-9751002QPAIC CMOS 2 CIRCUIT 8CDIP |
4,597 | - |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.25V/µs | 550 kHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
|
5962-0051201Q2AIC OPAMP GP 1 CIRCUIT 20LCCC |
3,515 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
5962-0051202Q2AIC OPAMP GP 1 CIRCUIT 20LCCC |
4,182 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
5962-8203602GAOPERATIONAL AMPLIFIER (OP07) |
1,995 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.
What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.
