Power Distribution Switches, Load Drivers
Use the filters and product table below to compare Power Distribution Switches, Load Drivers components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
BTS409L1-E3062AIC PWR SWITCH N-CHAN 1:1 TO220AB |
4,090 | - |
|
Datasheet | TO-263-5, D2PAK (4 Leads + Tab), TO-263BB | PROFET® | Tube | Discontinued at Digi-Key | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 5V ~ 34V | Not Required | 1.8A | 160mOhm | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | SMD TO-220AB/5 |
|
AUIPS71411GTRIC PWR SWITCH N-CHANNEL 1:1 8SO |
3,808 | - |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 6V ~ 60V | Not Required | 1.5A | 75mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | 8-SO |
|
BTS70122EPGXUMA1PROFET |
2,119 | - |
|
Datasheet | 14-TSSOP (0.154", 3.90mm Width) Exposed Pad | PROFET® | Tape & Reel (TR) | Active | Relay, Solenoid Driver | 2 | 1:1 | High Side | N-Channel | Logic | 3.1V ~ 18V | 3.1V ~ 18V | 6A | 11.5mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Current Limiting (Adjustable), Open Load Detect, Over Temperature, Over Voltage, Reverse Battery, Short Circuit, UVLO | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | PG-TSDSO-14 |
|
|
BTS409L1IC PWR SWITCH N-CHAN 1:1 TO220-5 |
2,391 | - |
|
Datasheet | TO-220-5 Formed Leads | PROFET® | Tube | Discontinued at Digi-Key | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 5V ~ 34V | Not Required | 1.8A | 160mOhm | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Through Hole | P-TO220-5-3 |
|
BTS409L1 E3043IC PWR SWITCH N-CHAN 1:1 TO220-5 |
1,933 | - |
|
Datasheet | TO-220-5 | PROFET® | Tube | Discontinued at Digi-Key | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 5V ~ 34V | Not Required | 1.8A | 160mOhm | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Through Hole | P-TO220-5 |
|
BTS5230GSIC PWR SWITCH N-CHAN 1:1 PDSO-14 |
3,622 | - |
|
Datasheet | 14-SOIC (0.154", 3.90mm Width) | PROFET® | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:1 | High Side | N-Channel | On/Off | 4.5V ~ 28V | Not Required | 1.8A | 140mOhm (Max) | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-DSO-14-37 |
|
AUIPS71411GIC PWR SWITCH N-CHANNEL 1:1 8SO |
1,388 | - |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) | - | Tube | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 6V ~ 60V | Not Required | 1.5A | 75mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | 8-SO |
|
|
BTS133 E3045AIC PWR SWITCH N-CHAN 1:1 TO220-3 |
2,960 | - |
|
Datasheet | TO-263-3, D2PAK (2 Leads + Tab), TO-263AB | HITFET® | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 60V (Max) | Not Required | 7A | 40mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-TO220-3-5 |
|
ITS4080SEPDXUMA1PROFET |
3,038 | - |
|
Datasheet | 14-TSSOP (0.154", 3.90mm Width) Exposed Pad | PROFET™ | Tray | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | Logic | 45V | 45V | 8A | 80mOhm (Max) | Non-Inverting | - | Current Limiting (Adjustable), Over Temperature, Over Voltage | - | - | - | Surface Mount | PG-TSDSO-14 |
|
TLE7233GXUMA1IC PWR DRIVER N-CHAN 1:4 24SSOP |
4,965 | - |
|
Datasheet | 24-SSOP (0.154", 3.90mm Width) | - | Tape & Reel (TR) | Not For New Designs | General Purpose | 4 | 1:4 | Low Side | N-Channel | SPI | 4.5V ~ 5.5V | 3V ~ 5.5V | 390mA | 1Ohm | - | - | Open Load Detect, Over Temperature | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-SSOP-24-5 |
Power Distribution Switches, Load Drivers FAQ
Common questions about filtering, comparing and sourcing Power Distribution Switches, Load Drivers components.
How can I narrow the Power Distribution Switches, Load Drivers selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Power Distribution Switches, Load Drivers part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.