Power Distribution Switches, Load Drivers
Use the filters and product table below to compare Power Distribution Switches, Load Drivers components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
BTS52001EJAXUMA1IC PWR SWITCH N-CHAN 1:1 DSO-8 |
2,238 | - |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | PROFET® | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 5V ~ 28V | Not Required | 1.5A | 200mOhm | Non-Inverting | - | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-DSO-8-43-EP |
|
BTS308 E3062AIC PWR SWITCH N-CHAN 1:1 TO220AB |
4,838 | - |
|
Datasheet | TO-263-5, D2PAK (4 Leads + Tab), TO-263BB | PROFET® | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 4.7V ~ 34V | Not Required | 1.18A | 270mOhm | Non-Inverting | Auto Restart | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | SMD TO-220AB/5 |
|
BTS142DAKSA1IC PWR SWITCH N-CHAN 1:1 TO252-3 |
1,059 | - |
|
Datasheet | TO-252-3, DPAK (2 Leads + Tab), SC-63 | HITFET® | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 42V (Max) | Not Required | 4.6A | 23mOhm | Non-Inverting | Auto Restart | Current Limiting (Fixed), Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-TO252-3-11 |
|
BTS70082EPGXUMA1PROFET |
1,904 | - |
|
Datasheet | 14-TSSOP (0.154", 3.90mm Width) Exposed Pad | PROFET® | Tape & Reel (TR) | Active | Relay, Solenoid Driver | 2 | 1:1 | High Side | N-Channel | Logic | 3.1V ~ 18V | 3.1V ~ 18V | 7.5A | 9mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Current Limiting (Adjustable), Open Load Detect, Over Temperature, Over Voltage, Reverse Battery, Short Circuit, UVLO | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | PG-TSDSO-14 |
|
ITS4035SEPDXUMA1PROFET |
1,175 | - |
|
Datasheet | 14-TSSOP (0.154", 3.90mm Width) Exposed Pad | PROFET™ | Tray | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | PWM | 5V ~ 45V | 5V ~ 45V | 13.2A | 27mOhm | Non-Inverting | Slew Rate Controlled | Current Limiting (Adjustable), Open Load Detect, Over Temperature, Over Voltage, Reverse Battery, Reverse Current, Short Circuit, UVLO | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-TSDSO-14 |
|
TLE6215GIC PWR SWITCH N-CHAN 1:1 PDSO-24 |
2,308 | - |
|
Datasheet | 24-SOIC (0.295", 7.50mm Width) | - | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:1 | Low Side | N-Channel | On/Off | 4.8V ~ 40V | Not Required | 1.3A | 210mOhm | Non-Inverting | - | Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-DSO-24-3 |
|
|
BTS308 E3059IC PWR SWITCH N-CHAN 1:1 TO220-5 |
1,328 | - |
|
Datasheet | TO-220-5 Formed Leads | PROFET® | Tube | Discontinued at Digi-Key | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 4.7V ~ 34V | Not Required | 1.18A | 270mOhm | Non-Inverting | Auto Restart | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Through Hole | P-TO220-5-3 |
|
TLE7233EMXUMA1IC PWR DRIVER N-CHAN 1:4 24-SSOP |
4,679 | - |
|
Datasheet | 24-LSSOP (0.154", 3.90mm Width) Exposed Pad | - | Tape & Reel (TR) | Not For New Designs | General Purpose | 4 | 1:4 | Low Side | N-Channel | SPI | 4.5V ~ 5.5V | 3V ~ 5.5V | 470mA | 1Ohm | - | - | Open Load Detect, Over Temperature | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | PG-SSOP-24-4 |
|
AUIPS1041LTRIC PWR SWITCH N-CHAN 1:1 SOT223 |
3,440 | - |
|
Datasheet | TO-261-4, TO-261AA | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 6V ~ 28V | Not Required | 1.5A | 80mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | SOT-223 |
|
BSP75NHUMA1IC PWR SWTCH N-CHAN 1:1 SOT223-4 |
3,037 | - |
|
Datasheet | TO-261-4, TO-261AA | HITFET® | Tape & Reel (TR) | Last Time Buy | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 60V (Max) | Not Required | 700mA | 430mOhm | Non-Inverting | Auto Restart | Current Limiting (Fixed), Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-SOT223-4 |
Power Distribution Switches, Load Drivers FAQ
Common questions about filtering, comparing and sourcing Power Distribution Switches, Load Drivers components.
How can I narrow the Power Distribution Switches, Load Drivers selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Power Distribution Switches, Load Drivers part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.