RF Amplifiers
Use the filters and product table below to compare RF Amplifiers components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Frequency | P1dB | Gain | Noise Figure | RF Type | Voltage - Supply | Current - Supply | Test Frequency | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
QPL9096TR71.7-2.7 GHZ ULTRA LOW-NOISE BYPA |
1,863 | - |
|
Datasheet | - | 8-VFDFN Exposed Pad | Tape & Reel (TR) | Active | 1.7GHz ~ 2.7GHz | 17dBm | 26.5dB | 0.75dB | FDD, TDD | 3V ~ 5.25V | 55mA | 1.7GHz ~ 2.7GHz | - | - | Surface Mount | 8-DFN (2x2) |
|
|
QPL7442TR74GHZ SINGLE-ENDED 20DB GAIN BLOC |
2,536 | - |
|
Datasheet | - | 8-VFDFN Exposed Pad | Tape & Reel (TR) | Active | 50MHz ~ 4GHz | 20.8dBm | 20dB | 1.5dB | CATV | 10V | 90mA | 50MHz ~ 3GHz | - | - | Surface Mount | 8-DFN (2x2) |
|
|
NBB-400DC-8GHZ GAIN BLOCK |
1,058 | - |
|
Datasheet | - | 4-Micro-X | Tape & Reel (TR) | Active | 0Hz ~ 8GHz | 13dBm | 13.5dB | 4.3dB | LMDS, VSAT, WLAN, UNII, DWDM, PTP PMP | 3.6V ~ 4.2V | 47mA | 2GHz | - | - | Surface Mount | 4-Micro-X |
|
|
TQP91111800-2700 MHZ, 2 W HIGH GAIN AMP |
1,830 | - |
|
Datasheet | - | 20-TFQFN Exposed Pad | Tape & Reel (TR) | Active | 1.8GHz ~ 2.7GHz | 32.5dBm | 29.8dB | 6.2dB | FDD, TDD | 5.25V | 521mA | 1.8GHz ~ 2.7GHz | - | - | Surface Mount | 20-QFN (4x4) |
|
|
NBB-310-T1IC AMP LMDS 0HZ-12GHZ 4MICRO-X |
1,210 | - |
|
Datasheet | - | 4-Micro-X | Tape & Reel (TR) | Active | 0Hz ~ 12GHz | 14.5dBm | 11dB ~ 11.5dB | 4.9dB | LMDS, VSAT, WLAN, UNII, DWDM, PTP PMP | 4.4V ~ 4.9V | 50mA | - | - | - | Surface Mount | 4-Micro-X |
|
|
CMD271P36 - 11 GHZ LOW NOISE AMPLIFIER |
375 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | 6GHz ~ 11GHz | 16.5dBm | 18.5dB | 1.8dB | General Purpose | 3V ~ 5.25V | 66mA | 8GHz ~ 11GHz | - | - | Surface Mount | 16-QFN (3x3) |
|
|
CMD316C36 - 20 GHZ LOW NOISE AMPLIFIER |
329 | - |
|
Datasheet | - | 16-WFQFN Exposed Pad | Tape & Reel (TR) | Active | 6GHz ~ 20GHz | 15.5dBm | 19dB | 2dB | General Purpose | 3V ~ 5V | 100mA | 18GHz ~ 20GHz | - | - | Surface Mount | 16-QFN (3x3) |
|
|
CMD328K36-18 GHZ LOW NOISE AMPLIFIER |
798 | - |
|
Datasheet | - | 16-TFQFN Exposed Pad | Tape & Reel (TR) | Active | 6GHz ~ 18GHz | 12dBm | 26dB | 1.8dB | General Purpose | 2V ~ 4V | 52mA | 6GHz ~ 18GHz | - | - | Surface Mount | 16-QFN (3x3) |
|
|
CMD309P45 - 11 GHZ LOW NOISE AMPLIFIER |
581 | - |
|
Datasheet | - | 24-VFQFN Exposed Pad | Tape & Reel (TR) | Active | 5GHz ~ 11GHz | 13dBm | 27dB | 1.4dB | General Purpose | 3V ~ 5V | 45mA | 5GHz ~ 11GHz | - | - | Surface Mount | 24-QFN (4x4) |
|
|
CMD170P47.5 - 9 GHZ 1W POWER AMPLIFIER |
238 | - |
|
Datasheet | - | 24-VFQFN Exposed Pad | Tape & Reel (TR) | Active | 7.5GHz ~ 9GHz | 18dBm | 30dB | - | General Purpose | 5V | 365mA | 7.5GHz ~ 9GHz | - | - | Surface Mount | 24-QFN (4x4) |
RF Amplifiers FAQ
Common questions about filtering, comparing and sourcing RF Amplifiers components.
How can I narrow the RF Amplifiers selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific RF Amplifiers part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
