RF Amplifiers
Use the filters and product table below to compare RF Amplifiers components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Frequency | P1dB | Gain | Noise Figure | RF Type | Voltage - Supply | Current - Supply | Test Frequency | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
QPA9126TR7HIGH LINEARITY GAIN BLOCK |
2,018 | - |
|
Datasheet | - | 8-VFDFN Exposed Pad | Tape & Reel (TR) | Active | 1GHz ~ 6GHz | 20dBm | 16dB | 1.4dB | General Purpose | 3.3V ~ 5.25V | - | - | - | - | Surface Mount | 8-DFN (2x2) |
|
|
QPA9127TR7HIGH LIN AMP |
1,826 | - |
|
Datasheet | - | 8-VFDFN Exposed Pad | Tape & Reel (TR) | Active | 1GHz ~ 6GHz | 19.5dBm | 20dB | 1.4dB | General Purpose | 3.3V ~ 5.25V | 70mA | 1GHz ~ 6GHz | - | - | Surface Mount | 8-DFN (2x2) |
|
|
TQP9107600-960 MHZ 2-STAGE PA |
4,767 | - |
|
Datasheet | - | 13-SMD, No Lead | Tape & Reel (TR) | Active | 600MHz ~ 960MHz | 30.5dBm | 35.5dB | 5dB | General Purpose | 5V | 370mA | 849MHz | - | - | Surface Mount | - |
|
|
QPA9122MTR72.3-5.0 GHZ 0.5W DRIVER AMP W/EN |
1,527 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | 2.3GHz ~ 5GHz | 26dBm | 40dB | 5.3dB | 5G, FDD, TDD | 4.75V ~ 5.25V | 95mA | 3.6GHz | - | - | Surface Mount | 16-SMT (3x3) |
|
|
TQP7M91042W HIGH LINEARITY AMPLIFIER |
2,217 | - |
|
Datasheet | - | 24-VFQFN Exposed Pad | Tape & Reel (TR) | Active | 600MHz ~ 2.7GHz | 32.8dBm | 17.3dB | 4.4dB | CDMA, LTE, W-CDMA | 5.25V | 435mA | 2.14GHz | - | - | Surface Mount | 24-QFN (4x4) |
|
|
QPA9942TR133.4-3.8 GHZ DOHERTY SMALL CELL P |
1,739 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | 3.3GHz ~ 3.8GHz | - | 31dB | - | 4G, 5G | 4.75V ~ 5.25V | 492mA | 3.3GHz ~ 3.8GHz | - | - | Surface Mount | 16-SMT (5x5) |
|
|
TQP7M910650-1500 MHZ, 2W HIGH LINEARITY A |
2,047 | - |
|
Datasheet | - | 24-QFN Exposed Pad | Tape & Reel (TR) | Active | 50MHz ~ 1.5GHz | 33.1dBm | 22dB | 4.8dB | CDMA, LTE, W-CDMA | 4.75V ~ 5.25V | 455mA | 940MHz | - | - | Surface Mount | 24-QFN (4x4) |
|
|
NBB-312-T1IC RF AMP LMDS 0HZ-12GHZ 9-MPGA |
606 | - |
|
Datasheet | - | 9-LSCPGA | Tape & Reel (TR) | Active | 0Hz ~ 12GHz | 15.8dBm | 12.5dB | - | LMDS, VSAT, WLAN, UNII, DWDM, PTP PMP | 5V | 50mA | 6GHz | - | - | Through Hole | 9-MPGA (3x3) |
|
|
NBB-402-T1IC RF AMP LMDS 0HZ-8GHZ 9-MPGA |
1,529 | - |
|
Datasheet | - | 9-LCLGA | Tape & Reel (TR) | Active | 0Hz ~ 8GHz | 15.8dBm | 15.8dB | 4.3dB | LMDS, VSAT, WLAN, UNII, DWDM, PTP PMP | 3.6V ~ 4.2V | 35mA ~ 55mA | 2GHz | - | - | Surface Mount | 9-MPGA (3.05x3.05) |
|
|
CMD264P36 - 18 GHZ LOW NOISE AMPLIFIER |
426 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | 6GHz ~ 18GHz | 13dBm | 30dB | 1.7dB | General Purpose | 2V ~ 4.5V | 63mA | 6GHz ~ 9GHz | - | - | Surface Mount | 16-QFN (3x3) |
RF Amplifiers FAQ
Common questions about filtering, comparing and sourcing RF Amplifiers components.
How can I narrow the RF Amplifiers selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific RF Amplifiers part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
