Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1635CS8LT1635 - MICROPOWER RAIL-TO-RAIL |
744 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.05V/µs | 175 kHz | - | 2 nA | 300 µV | 135µA | 40 mA | 1.2 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LT1784IS5#TRIC OPAMP GP 1 CIRCUIT TSOT23-5 |
2,284 | - |
|
Datasheet | Over-The-Top® | SOT-23-5 Thin, TSOT-23-5 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 2.2V/µs | 2.6 MHz | - | 250 nA | 1.6 mV | 750µA | 27 mA | 2.5 V | 18 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-5 |
|
LT1817CS#PBFIC VOLTAGE FEEDBACK 4 CIRC 14SO |
447 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 4 | - | 1500V/µs | 220 MHz | 350 MHz | 2 µA | 200 µV | 6.5mA (x4 Channels) | 80 mA | 2.5 V | 11 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
LT1724IS#PBFIC OPAMP GP 4 CIRCUIT 14SO |
1,373 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | - | 70V/µs | 200 MHz | - | 40 nA | 100 µV | 3.7mA (x4 Channels) | 50 mA | 5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
LT6018IDE#PBFLT6018 - ULTRALOW DISTORTION, UL |
547 | - |
|
Datasheet | * | 10-WFQFN Exposed Pad | Bulk | Obsolete | General Purpose | 1 | - | 30V/µs | 15 MHz | - | 60 nA | 8 µV | 7.2mA | 100 mA | 8 V | - | -40°C ~ 85°C | - | - | Surface Mount | 12-DFN (4x3) |
|
LT1211IN8#PBFIC OPAMP GP 2 CIRCUIT 8DIP |
190 | - |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 7V/µs | 14 MHz | - | 50 nA | 150 µV | 1.8mA (x2 Channels) | 50 mA | 2.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LT6018HDE#PBFLT6018 - ULTRALOW DISTORTION, UL |
2,357 | - |
|
Datasheet | * | 10-WFQFN Exposed Pad | Bulk | Obsolete | General Purpose | 1 | - | 30V/µs | 15 MHz | - | 60 nA | 8 µV | 7.2mA | 100 mA | 8 V | - | -40°C ~ 125°C | - | - | Surface Mount | 12-DFN (4x3) |
|
LT1638IDDIC OPAMP GP 2 CIRCUIT 8DFN |
1,275 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.4V/µs | 1.2 MHz | - | 20 nA | 450 µV | 205µA (x2 Channels) | 40 mA | 2.5 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LT1674IS#PBFIC OPAMP GP 4 CIRCUIT 14SO |
322 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA (x4 Channels) | 1.5 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
LT1220CS8LT1220 - OP AMP GENERAL PURPOSE |
3,707 | - |
|
Datasheet | LT1220 | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 1 | - | 250V/µs | 45 MHz | - | 100 nA | 500 µV | 8mA | 26 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
