Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT6013IDD#PBFLT6013 - MICROPOWER PRECISION R- |
363 | - |
|
Datasheet | * | 8-WFDFN Exposed Pad | Bulk | Obsolete | General Purpose | 1 | - | 0.2V/µs | 1.4 MHz | - | 100 pA | 30 µV | 200µA | 20 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LTC2051IDDLTC2051 - 2X ZERO-DRIFT OP AMPS |
2,032 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Bulk | Active | Chopper (Zero-Drift) | 2 | Rail-to-Rail | 2V/µs | 3 MHz | - | 90 pA | 1 µV | 1mA (x2 Channels) | - | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LT1620CS8#PBFLT1620 - R-TO-R CURRENT SENSE AM |
223 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Sense | 1 | - | - | - | - | 4 mA | 8 mV | 2.8mA | - | 4.5 V | 5.5 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SO |
|
|
LT1672CS8#PBFLT1672 - PRECISION RAIL-TO-RAIL |
200 | - |
|
Datasheet | Over-The-Top® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA | 1.5 mA | 2.2 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LTC6102HVCDD#PBFPRECISION ZERO DRIFT CURRENT SEN |
544 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Bulk | Active | Current Sense | 1 | - | - | 200 kHz | - | 60 pA | 3 µV | 420µA | 1 mA | 5 V | 100 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LT1991IDD#TRPBFLT1991 - PRECISION DIFFERENCE AM |
6,554 | - |
|
Datasheet | - | 10-WFDFN Exposed Pad | Bulk | Obsolete | Programmable Gain | 1 | - | 0.12V/µs | 560 kHz | 110 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
|
LT1996IDD#PBFLT1996 - PRECISION, 100UA GAIN S |
1,210 | - |
|
Datasheet | * | 10-WFDFN Exposed Pad | Bulk | Obsolete | Programmable Gain | 1 | - | 0.12V/µs | 560 kHz | 38 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
OP15FN8#PBFOP15 - HIGH PERF JFET OP AMP |
950 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 11V/µs | 5.7 kHz | - | 30 pA | 400 µV | 2.7mA | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LT6010ACDD#PBFLT6010 - RAIL-TO-RAIL OUTPUT PRE |
363 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.11V/µs | 350 kHz | - | 2 nA | 20 µV | 260µA | 20 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LT1192CN8#PBFLT1192 - ULTRA HIGH SPEED OA(AV= |
950 | - |
|
Datasheet | * | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | - | 450V/µs | 350 MHz | - | 500 nA | 200 µV | 32mA | 50 mA | - | - | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
