Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1122CS8LT1122 - FAST SETTLING, JFET INP |
1,135 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | J-FET | 1 | - | 75V/µs | 13 MHz | - | 12 pA | 130 µV | 7.8mA | - | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LT1996AIDD#PBFLT1996 - PRECISION DIFFERENCE AM |
242 | - |
|
Datasheet | * | 10-WFDFN Exposed Pad | Bulk | Obsolete | Programmable Gain | 1 | - | 0.12V/µs | 560 kHz | 38 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
LTC6911HMS-2#PBFLTC6911 - DUAL DIGITALLY CONTROL |
531 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Programmable Gain | 2 | - | 16V/µs | 11 MHz | - | - | 2 mV | 3.1mA (x2 Channels) | 35 mA | 2.7 V | - | -40°C ~ 125°C | - | - | Surface Mount | 10-MSOP |
|
LT1817IGN#PBFLT1817 - QUAD 220MHZ, 1500V/US O |
123 | - |
|
Datasheet | LT® | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 4 | - | 1500V/µs | 220 MHz | 350 MHz | 2 µA | 200 µV | 6.5mA (x4 Channels) | 80 mA | 4 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
LT1057SW#PBFLT1057 - DUAL JFET INPUT PRECISI |
188 | - |
|
Datasheet | LT® | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | J-FET | 2 | - | 13V/µs | 5 MHz | - | 10 pA | 300 µV | 1.7mA (x2 Channels) | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
|
LT1057SW#TRPBFLT1057 - DUAL JFET INPUT PRECISI |
1,000 | - |
|
Datasheet | LT® | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | J-FET | 2 | - | 13V/µs | 5 MHz | - | 10 pA | 300 µV | 1.7mA (x2 Channels) | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
LTC6410IUD-6#PBFLOW DISTORTION, LOW NOISE DIFFER |
484 | - |
|
Datasheet | - | 16-WFQFN Exposed Pad | Bulk | Active | RF/IF Differential | 1 | Differential | 1500V/µs | - | 1.4 GHz | - | 400 µV | 125mA | 42 mA | 2.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QFN (3x3) |
|
LT1122BCN8#PBFIC OPAMP JFET 1 CIRCUIT 8DIP |
124 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 80V/µs | 14 MHz | - | 10 pA | 120 µV | 7.5mA | - | 10 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LT1260CS#TRPBFIC OPAMP CFA 3 CIRCUIT 16SO |
159 | - |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 3 | - | 1600V/µs | 130 MHz | 130 MHz | 20 µA | 2 mV | 5mA (x3 Channels) | 60 mA | 4 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
LT1221CN8#PBFLT1221 - VERY HI SPEED OA (AV=4) |
1,076 | - |
|
Datasheet | C-Load™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 250V/µs | 150 MHz | - | 100 nA | 200 µV | 8mA | 26 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
