Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1209CN#PBFLT1209 - OPERATIONAL AMPLIFIER, |
675 | - |
|
Datasheet | LT® | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 4 | - | 400V/µs | 45 MHz | - | 4 µA | 1 mV | 7mA (x4 Channels) | 40 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
LT1991IDD#PBFIC OPAMP PGA 1 CIRCUIT 10DFN |
1,851 | - |
|
Datasheet | - | 10-WFDFN Exposed Pad | Bulk | Active | Programmable Gain | 1 | Rail-to-Rail | 0.12V/µs | 560 kHz | 110 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
LT1230CSLT1230 - QUAD 100MHZ CURRENT FEE |
4,139 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 4 | - | 700V/µs | - | 100 MHz | 10 µA | 3 mV | 6mA (x4 Channels) | 125 mA | 4 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
LT1620CGN#PBFLT1620 - R-TO-R CURRENT SENSE AM |
100 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | Current Sense | 1 | - | - | - | - | 4 mA | 8 mV | 2.8mA | - | 4.5 V | 5.5 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SSOP |
|
|
LT1399CGN#PBFTRIPLE 300MHZ CURRENT FEEDBACK A |
100 | - |
|
Datasheet | LT® | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 3 | - | 800V/µs | 300 MHz | 300 MHz | 10 µA | 1.5 mV | 4.6mA (x3 Channels) | 80 mA | 4 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SSOP |
|
LT2179CS#PBFOPERATIONAL AMPLIFIER, 4 FUNC, 7 |
1,083 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 0.04V/µs | 85 kHz | - | 3 nA | 100 µV | 17µA (x4 Channels) | - | 2.2 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
LTC2051CS8#PBFDUAL ZERO-DRIFT OPERATIONAL AMPL |
1,893 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Chopper (Zero-Drift) | 2 | Rail-to-Rail | 2V/µs | 3 MHz | - | 90 pA | 1 µV | 1mA (x2 Channels) | - | 2.7 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LT6200CS8LT6200 - OP AMP BUFFER 165MHZ 8- |
1,687 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Buffer | 1 | Rail-to-Rail | 50V/µs | 165 MHz | - | 23 µA | 2.5 mV | 20mA | 90 mA | 2.5 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
LT1672IMS8#PBFLT1672 - 2UA PREC R-TO-R I/O AV> |
1,884 | - |
|
Datasheet | Over-The-Top® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA | 1.5 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
LT1632IN8#PBFLT1632 - 45MHZ, 45V/US, 2X R2R I |
2,148 | - |
|
Datasheet | LT® | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 45V/µs | 45 MHz | - | 1.15 µA | 500 µV | 4.6mA (x2 Channels) | 70 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
