Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MC34071ADGIC OPAMP GP 1 CIRCUIT 8SOIC |
1,042 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 1 | Single-Ended | 13V/µs | 4.5 MHz | - | 100 nA | 500 µV | 1.9mA | 30 mA | 3 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
MC34081BPIC OPAMP JFET 1 CIRCUIT 8DIP |
3,120 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Not For New Designs | J-FET | 1 | - | 50V/µs | 16 MHz | - | 60 pA | 500 µV | 2.5mA | 31 mA | 44 V | 44 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
SCY33201DR2GIC ANA LO-V / R-R SNGL OP AMP |
4,472 | - |
|
Datasheet | - | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
LA6500LL-EIC POWER 1 CIRCUIT TO220-5H |
4,404 | - |
|
Datasheet | - | TO-220-5 Formed Leads | Bulk | Obsolete | Power | 1 | - | 0.15V/µs | - | - | 100 nA | 2 mV | 6mA | 1 A | 30 V | 30 V | -20°C ~ 75°C | - | - | Through Hole | TO-220-5H |
|
KA358ADTFIC OPAMP GP 2 CIRCUIT 8SOIC |
3,359 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | - | - | - | 45 nA | 2 mV | 800µA | 30 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
MC1458DIC OPAMP GP 2 CIRCUIT 8SOIC |
7,068 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 0.5V/µs | 1 MHz | - | 80 nA | 1 mV | 3.4mA (x2 Channels) | 25 mA | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
KA2902DTFIC OPAMP GP 4 CIRCUIT 14SOP |
2,847 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | - | - | - | 40 nA | 1.5 mV | 1mA | 40 mA | 3 V | 26 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOP |
|
MC33501SNT1GIC OPAMP GP 1 CIRCUIT 5TSOP |
4,001 | - |
|
Datasheet | SMARTMOS™ | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 3V/µs | 4 MHz | - | 0.04 pA | 500 µV | 1.65mA | 70 mA | 1 V | 7 V | -40°C ~ 105°C | - | - | Surface Mount | 5-TSOP |
|
MC33501SNT1GHIC OPAMP GP 1 CIRCUIT 5TSOP |
9,000 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 3V/µs | 4 MHz | - | 0.04 pA | 500 µV | 1.65mA | 70 mA | 1 V | 7 V | -40°C ~ 105°C | - | - | Surface Mount | 5-TSOP |
|
LM224DR2IC OPAMP QUAD LOW POWER 14SOIC |
1,645 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | - | 1 MHz | - | 90 nA | 2 mV | - | 40 mA | 3 V | 32 V | -25°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
