Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
NCV33202VDR2IC OPAMP DUAL R-R LOW VOLT 8SOIC |
2,244 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 1V/µs | 2.2 MHz | - | 80 nA | 8 mV | 900µA (x2 Channels) | 80 mA | 1.8 V | 12 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
KA324IC OPAMP GP 4 CIRCUIT 14MDIP |
1,328 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | - | - | - | 40 nA | 1.5 mV | 1mA | 40 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Through Hole | 14-MDIP |
|
MC33284DR2IC OPAMP JFET 4 CIRCUIT 14SOIC |
1,447 | - |
|
Datasheet | MC33282/284 | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | J-FET | 4 | - | 15V/µs | 35 MHz | - | 30 pA | 200 µV | 2.15mA (x4 Channels) | 27 mA | 5 V | 72 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
NE5532DR2GIC OPAMP GP 2 CIRCUIT 16SOIC |
4,212 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 9V/µs | 10 MHz | - | 300 nA | 500 µV | 8mA | 38 mA | 6 V | 40 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SOIC |
|
|
MC33202VDGIC OPAMP GP 2 CIRCUIT 8SOIC |
3,804 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 1V/µs | 2.2 MHz | - | 80 nA | 8 mV | 900µA (x2 Channels) | 80 mA | 1.8 V | 12 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
S74LCX16245DTR2GINTEGRATED CIRCUIT |
3,340 | - |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
NCS2004AMUTAGIC OPAMP GP 1 CIRCUIT 6UDFN |
1,697 | - |
|
Datasheet | - | 6-UFDFN Exposed Pad | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 2.6V/µs | 3.5 MHz | - | 45 pA | 500 µV | 400µA | 13 mA | 2.5 V | 16 V | -40°C ~ 105°C | - | - | Surface Mount | 6-UDFN (1.6x1.6) |
|
|
MC33078ML1IC OPAMP GP 2 CIRCUIT |
6,000 | - |
|
Datasheet | - | - | Bulk | Active | General Purpose | 2 | - | 7V/µs | 16 MHz | - | 300 nA | 150 µV | 2.05mA (x2 Channels) | 37 mA | 10 V | 36 V | -40°C ~ 85°C (TA) | - | - | - | - |
|
MC33077PGIC OPAMP GP 2 CIRCUIT 8DIP |
4,049 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 11V/µs | 37 MHz | - | 280 nA | 130 µV | 3.5mA | 33 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
AU5517DR2IC AMP 2 CURRENT CTRL 16-SOIC |
1,716 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Transconductance | 2 | - | 50V/µs | 2 MHz | - | 400 nA | 400 µV | 2.6mA | 650 µA | 44 V | 44 V | 150°C (TJ) | - | - | Surface Mount | 16-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
