Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LA6500-MDB-EIC POWER 1 CIRCUIT TO220-5H |
3,228 | - |
|
Datasheet | - | TO-220-5 Formed Leads | Bulk | Obsolete | Power | 1 | - | 0.15V/µs | - | - | 100 nA | 2 mV | 6mA | 1 A | 30 V | 30 V | -20°C ~ 75°C | - | - | Through Hole | TO-220-5H |
|
NE5517DGIC OPAMP TRANSCOND 2 CIRC 16SOIC |
4,785 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Transconductance | 2 | Push-Pull | 50V/µs | 2 MHz | - | 400 nA | 400 µV | 2.6mA | 500 µA | 4 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
SA5230NGIC OPAMP GP 1 CIRCUIT 8DIP |
3,244 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.25V/µs | 600 kHz | - | 40 nA | 400 µV | 1.1mA | 32 mA | 1.8 V | 15 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
NE5534ADR2GIC OPAMP GP 1 CIRCUIT 8SOIC |
1,808 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 13V/µs | 10 MHz | - | 500 nA | 500 µV | 4mA | 38 mA | 6 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
SA5230NIC OPAMP GP 1 CIRCUIT 8DIP |
4,766 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.25V/µs | 600 kHz | - | 40 nA | 400 µV | 1.1mA | 32 mA | 1.8 V | 15 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
MC33204VPGIC OPAMP GP 4 CIRCUIT 14DIP |
1,754 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 1V/µs | 2.2 MHz | - | 80 nA | 10 mV | 900µA (x4 Channels) | 80 mA | 1.8 V | 12 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-PDIP |
|
|
NE5230DR2GIC OPAMP GP 1 CIRCUIT 8SOIC |
1,650 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.25V/µs | 600 kHz | - | 40 nA | 400 µV | 1.1mA | 32 mA | 1.8 V | 15 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LM2902MIC OPAMP GP 4 CIRCUIT 14SOP |
2,125 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | - | - | - | 90 nA | 2 mV | - | 40 mA | 3 V | 32 V | -40°C ~ 105°C | - | - | Surface Mount | 14-SOP |
|
LA4262-EAUDIO AMPLIFIER SE 2CH |
21,196 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
NCS199A2SQT2GIC CURRENT SENSE 1 CIRCUIT SC88 |
2,791 | - |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | Rail-to-Rail | 0.4V/µs | - | 60 kHz | 60 µA | 5 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | SC-88/SC70-6/SOT-363 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
