Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC1047CSW#TRPBFIC OPAMP ZERO-DRIFT 2 CIRC 16SO |
1,000 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 2 | - | 0.2V/µs | 200 kHz | - | 5 pA | 3 µV | 80µA (x2 Channels) | - | 4.75 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
AD843KNZIC OPAMP GP 1 CIRCUIT 8DIP |
163 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 250V/µs | 34 MHz | - | 40 pA | 500 µV | 12mA | 50 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT2079IS#PBFIC OPAMP GP 4 CIRCUIT 14SO |
440 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | - | 0.07V/µs | 200 kHz | - | 6 nA | 80 µV | 47µA (x4 Channels) | - | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
ADA4897-2TRMZ-EPIC OPAMP VFB 2 CIRCUIT 10MSOP |
1,590 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Active | Voltage Feedback | 2 | Rail-to-Rail | 120V/µs | 90 MHz | 230 MHz | 4 µA | 28 µV | 3mA (x2 Channels) | 80 mA | 3 V | 10 V | -55°C ~ 125°C | - | - | Surface Mount | 10-MSOP |
|
AD8428ARZIC INST AMP 1 CIRCUIT 8SOIC |
231 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 50V/µs | - | 3.5 MHz | 200 nA | 100 µV | 6.5mA | 30 mA | 8 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LTC6091HUFE#PBFIC OPAMP GP 2 CIRCUIT 32QFN |
341 | - |
|
Datasheet | - | 16-WFQFN Exposed Pad | Tube | Active | General Purpose | 2 | Rail-to-Rail | 21V/µs | 12 MHz | - | 3 pA | 330 µV | 2.8mA (x2 Channels) | 90 mA | 9.5 V | 140 V | -40°C ~ 125°C | - | - | Surface Mount | 32(16)-QFN (4x6) |
|
|
AD843JNZIC OPAMP GP 1 CIRCUIT 8DIP |
239 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 250V/µs | 34 MHz | - | 50 pA | 1 mV | 12mA | 50 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT1102ACN8#PBFIC INST AMP 1 CIRCUIT 8DIP |
131 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 30V/µs | 3.5 MHz | - | 3 pA | 180 µV | 3.3mA | - | 18 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
AD620BRZ-RLIC INST AMP 1 CIRCUIT 8SOIC |
3,795 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 1.2V/µs | - | 1 MHz | 500 pA | 15 µV | 900µA | 18 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LT1210CT7#37PBFIC OPAMP CFA 1 CIRCUIT TO220-7 |
710 | - |
|
Datasheet | - | TO-220-7 Formed Leads | Tube | Active | Current Feedback | 1 | - | 900V/µs | - | 35 MHz | - | 3 mV | 35mA | 2 A | 10 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-7 Flow 37 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
