Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1359CS14#PBFIC VOLTAGE FEEDBACK 4 CIRC 14SO |
1,694 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 4 | - | 600V/µs | 25 MHz | - | 120 nA | 200 µV | 2mA (x4 Channels) | 30 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
AD629BNZIC OPAMP DIFF 1 CIRCUIT 8DIP |
178 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Current Sense | 1 | - | 2.1V/µs | - | 500 kHz | - | 100 µV | 900µA | 25 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LT1167AIS8-1#PBFIC INST AMP 1 CIRCUIT 8SO |
2,423 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | 1 MHz | - | 50 pA | 15 µV | 900µA | - | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LT1362CS#PBFIC VOLTAGE FEEDBACK 4 CIRC 16SO |
330 | - |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 4 | - | 800V/µs | 50 MHz | - | 300 nA | 300 µV | 4mA (x4 Channels) | 34 mA | 5 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SO |
|
AMP02FSZIC INST AMP 1 CIRCUIT 16SOIC |
2,521 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | Instrumentation | 1 | - | 6V/µs | - | 1.2 MHz | 4 nA | 40 µV | 5mA | 32 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
AD827JNZIC OPAMP GP 2 CIRCUIT 8DIP |
579 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | - | 300V/µs | 50 MHz | - | 3.3 µA | 300 µV | 10mA | 32 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT1210IR#PBFIC OPAMP CFA 1 CIRCUIT 7DDPAK |
175 | - |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tube | Active | Current Feedback | 1 | - | 900V/µs | - | 35 MHz | - | 3 mV | 50mA | 2 A | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | DDPAK-7 |
|
|
AD797ANZIC OPAMP GP 1 CIRCUIT 8DIP |
1,781 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 20V/µs | 110 MHz | 8 MHz | 250 nA | 25 µV | 8.2mA | 50 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
AD743JRZ-16IC OPAMP JFET 1 CIRCUIT 16SOIC |
187 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | J-FET | 1 | - | 2.8V/µs | - | 4.5 MHz | 250 pA | 250 µV | 8.1mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
AD621ANZIC INST AMP 1 CIRCUIT 8DIP |
143 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | - | 800 kHz | 500 pA | 75 µV | 900µA | 18 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
