Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1365CS#PBFIC VOLTAGE FEEDBACK 4 CIRC 16SO |
414 | - |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 4 | - | 1000V/µs | 70 MHz | - | 600 nA | 500 µV | 6.3mA (x4 Channels) | 60 mA | 5 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
AD8479TRZ-EPIC OPAMP GP 1 CIRCUIT 8SOIC |
3,817 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 9V/µs | - | 130 kHz | - | 500 µV | 550µA | 55 mA | - | - | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD621BNZIC INST AMP 1 CIRCUIT 8DIP |
103 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | - | 800 kHz | 500 pA | 50 µV | 900µA | 18 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
AMP01GSZIC INST AMP 1 CIRCUIT 20SOIC |
113 | - |
|
Datasheet | - | 20-SOIC (0.295", 7.50mm Width) | Tube | Active | Instrumentation | 1 | - | 4.5V/µs | - | 570 kHz | 2 nA | 40 µV | 3mA | 120 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 20-SOIC |
|
AD625KNZIC INST AMP 1 CIRCUIT 16DIP |
343 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 5V/µs | 25 MHz | 650 kHz | 20 nA | 25 µV | 3.5mA | - | 12 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 16-PDIP |
|
AD8541ARZ-REELIC OPAMP GP 1 CIRCUIT 8SOIC |
6,166 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.92V/µs | 1 MHz | - | 4 pA | 1 mV | 45µA | 30 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD8601WDRTZ-REELIC OPAMP GP 1 CIRCUIT SOT23-5 |
110 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 6V/µs | 8.4 MHz | - | 0.2 pA | 1.3 mV | 750µA | 50 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | - | Surface Mount | SOT-23-5 |
|
AD8542ARUZ-REELIC OPAMP GP 2 CIRCUIT 8TSSOP |
3,653 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.92V/µs | 1 MHz | - | 4 pA | 1 mV | 45µA (x2 Channels) | 30 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TSSOP |
|
|
ADTL082ARZ-REELIC OPAMP JFET 2 CIRCUIT 8SOIC |
4,463 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 20V/µs | 5 MHz | - | 2 pA | 1.5 mV | 1.2mA (x2 Channels) | 27 mA | 8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
ADTL082ARZ-REEL7IC OPAMP JFET 2 CIRCUIT 8SOIC |
1,918 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 20V/µs | 5 MHz | - | 2 pA | 1.5 mV | 1.2mA (x2 Channels) | 27 mA | 8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
