Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE2061MLBIC OPAMP JFET 1 CIRCUIT TO99-8 |
493 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 3.4V/µs | 2 MHz | - | 4 pA | 600 µV | 290µA | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
|
THS4062CDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
1,947 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Voltage Feedback | 2 | - | 400V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA (x2 Channels) | 115 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
TLV2434IPWIC CMOS 4 CIRCUIT 14TSSOP |
3,462 | - |
|
Datasheet | LinCMOS™ | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Obsolete | CMOS | 4 | Rail-to-Rail | 0.25V/µs | 550 kHz | - | 1 pA | 300 µV | 100µA (x4 Channels) | 50 mA | 2.7 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
TLV2434IDIC CMOS 4 CIRCUIT 14SOIC |
118 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 0.25V/µs | 550 kHz | - | 1 pA | 300 µV | 100µA (x4 Channels) | 50 mA | 2.7 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
OPA4650PIC OPAMP VFB 160MHZ QUAD 14DIP |
869 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 4 | - | 240V/µs | 360 MHz | - | 5 µA | 1 mV | 23mA | 75 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
OPA687UIC OPAMP VFB 3.8GHZ SGL 8SOIC |
5,093 | - |
|
Datasheet | SpeedPlus™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 900V/µs | 3.8 GHz | - | 20 µA | 100 µV | 18.5mA | 80 mA | 10 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS4061CDRIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,872 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 400V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA | 115 mA | 9 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
OPA1612AIDRGROPA1612 - SOUNDPLUS AUDIO OPERAT |
3,436,497 | - |
|
Datasheet | SoundPlus™ | 8-WFDFN Exposed Pad | Bulk | Active | Audio | 2 | Rail-to-Rail | 27V/µs | 80 MHz | - | 60 nA | 100 µV | 3.6mA (x2 Channels) | 62 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SON (3x3) |
|
|
THS4041IDRQ1IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
4,151 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 400V/µs | - | 165 MHz | 2.5 µA | 2.5 mV | 8mA | 100 mA | 9 V | 32 V | -40°C ~ 85°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
THS4121IDIC OPAMP DIFF 1 CIRCUIT 8SOIC |
2,755 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
