Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4120IDGKIC OPAMP DIFF 1 CIRCUIT 8VSSOP |
1,078 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLV2475AINIC CMOS 4 CIRCUIT 16DIP |
9,701 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x4 Channels) | 35 mA | 2.7 V | 6 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 16-PDIP |
|
LT1012CDIC OPAMP GP 1 CIRCUIT 8SOIC |
131 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 0.2V/µs | - | - | 40 pA | 25 µV | 380µA | - | 40 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLE2024AINIC OPAMP GP 4 CIRCUIT 14DIP |
4,126 | - |
|
Datasheet | Excalibur™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 4 | - | 0.7V/µs | 2.8 MHz | - | 45 nA | 750 µV | 1.05mA (x4 Channels) | 40 mA | 4 V | 40 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
TLC2810ZPIC OPAMP GP 2 CIRCUIT 8DIP |
4,515 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 3.6V/µs | 1.7 MHz | - | 7 pA | 1.8 mV | 1mA (x2 Channels) | - | 4 V | 16 V | -40°C ~ 150°C (TA) | - | - | Through Hole | 8-PDIP |
|
TLE2064ACDRIC OPAMP JFET 4 CIRCUIT 14SOIC |
4,602 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
THS4120CDGNIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
1,302 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
TLC252CPIC CMOS 2 CIRCUIT 8DIP |
3,048 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | - | 2.9V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 1.9mA (x2 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
OPA3690IDBQRIC OPAMP VFB 3 CIRCUIT 16SSOP |
3,619 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Voltage Feedback | 3 | Differential | 1800V/µs | 300 MHz | 500 MHz | 5 µA | 1 mV | 16.5mA | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
OPA3690IDRIC OPAMP VFB 3 CIRCUIT 16SOIC |
4,526 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 3 | Differential | 1800V/µs | 300 MHz | 500 MHz | 5 µA | 1 mV | 16.5mA | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
