Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMC6042IM/NOPBIC CMOS 2 CIRCUIT 8SOIC |
2,041 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 26µA (x2 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
OPA234E/2K5IC OPAMP GP 1 CIRCUIT 8VSSOP |
2,251 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 0.2V/µs | 350 kHz | - | 12 nA | 70 µV | 275µA | 22 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLE2024CNIC OPAMP GP 4 CIRCUIT 14DIP |
3,974 | - |
|
Datasheet | Excalibur™ | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 0.5V/µs | 2.8 MHz | - | 45 nA | 1 mV | 1.05mA (x4 Channels) | 40 mA | 4 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
TLE2161IDRIC OPAMP JFET 1 CIRCUIT 8SOIC |
4,116 | - |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 1 | - | 10V/µs | 6.4 MHz | - | 4 pA | 600 µV | 290µA | 80 mA | 7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TL034AINIC OPAMP JFET 4 CIRCUIT 14DIP |
4,021 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 5.1V/µs | 1.1 MHz | - | 2 pA | 580 µV | 870µA (x4 Channels) | 40 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
OPA688PIC OPAMP VFB 290MHZ SGL 8DIP |
500 | - |
|
Datasheet | SpeedPlus™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | Single-Ended | 1000V/µs | 290 MHz | 530 MHz | 6 µA | 2 mV | 15.8mA | 105 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
TLC4501IDIC OPAMP GP 1 CIRCUIT 8SOIC |
4,895 | - |
|
Datasheet | LinEPIC™, Self-Cal™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 2.5V/µs | 4.7 MHz | - | 1 pA | 10 µV | 1mA | 50 mA | 4 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4062CDRG4IC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
2,814 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Voltage Feedback | 2 | - | 400V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA (x2 Channels) | 115 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4120IDRIC OPAMP DIFF 1 CIRCUIT 8SOIC |
2,388 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4081CDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,499 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 230V/µs | - | 175 MHz | 1.2 µA | 1 mV | 3.4mA | 85 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
