Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-9566602QDAIC CMOS 4 CIRCUIT 14CFP |
3,562 | - |
|
Datasheet | LinCMOS™ | 14-CFlatPack | Bulk | Active | CMOS | 4 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 200 µV | 140µA (x4 Channels) | - | 2.7 V | 8 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-CFP |
|
TLE2072AMJGBIC OPAMP JFET 2 CIRCUIT 8CDIP |
6,280 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 45V/µs | 10 MHz | - | 20 pA | 700 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
|
TLC2272AMJGBIC CMOS 2 CIRCUIT 8CDIP |
1,809 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 2.4mA (x2 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
INA105AMIC OPAMP DIFF 1 CIRCUIT TO99-8 |
1,020 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Differential | 1 | - | 3V/µs | - | 1 MHz | - | 50 µV | 1.5mA | 20 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
|
INA105BMIC OPAMP DIFF 1 CIRCUIT TO99-8 |
1,452 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Differential | 1 | - | 3V/µs | - | 1 MHz | - | 50 µV | 1.5mA | 20 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
THS3201MDGNREPIC OPAMP CFA 1 CIRCUIT 8HVSSOP |
4,448 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Not For New Designs | Current Feedback | 1 | - | 9800V/µs | - | 1.8 GHz | 14 µA | 700 µV | 14mA | 115 mA | 6.6 V | 15 V | -55°C ~ 125°C | - | - | Surface Mount | 8-HVSSOP |
|
TLV2422MFKBIC OPAMP GP 2 CIRCUIT 20LCCC |
137 | - |
|
Datasheet | LinCMOS™ | 20-CLCC | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.02V/µs | 5.3 MHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
TL082MFKBIC OPAMP JFET 2 CIRCUIT 20LCCC |
108 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | J-FET | 2 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA (x2 Channels) | 40 mA | 10 V | 30 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
TLE2142MUBIC OPAMP GP 2 CIRCUIT 10CFP |
425 | - |
|
Datasheet | Excalibur™ | 10-CDFF | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 290 µV | 6.9mA (x2 Channels) | 50 mA | 4 V | 44 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-CFP |
|
|
5962-0051205Q2AIC OPAMP GP 2 CIRCUIT 20LCCC |
118 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x2 Channels) | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
