Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-9751402QHAIC CMOS 2 CIRCUIT 10CFP |
111 | - |
|
Datasheet | LinCMOS™ | 10-CDFF | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.2V/µs | 52 kHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-CFP |
|
5962-0051207QCAIC OPAMP GP 1 CIRCUIT 14CDIP |
245 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 14-CDIP |
|
TLV2422AMFKBIC OPAMP GP 2 CIRCUIT 20LCCC |
1,029 | - |
|
Datasheet | LinCMOS™ | 20-CLCC | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.02V/µs | 5.3 MHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
TLC2254AMJBIC OPAMP GP 4 CIRCUIT 14CDIP |
608 | - |
|
Datasheet | LinCMOS™ | 14-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.12V/µs | 210 kHz | - | 1 pA | 200 µV | 160µA (x4 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 14-CDIP |
|
|
5962-0051208QCAIC OPAMP GP 2 CIRCUIT 14CDIP |
233 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x2 Channels) | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 14-CDIP |
|
CLC406AJEIC OP AMP LOW PWR WIDE 8-SOIC |
4,723 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Feedback | 1 | - | 1500V/µs | - | 160 MHz | 5 µA | 2 mV | 5mA | 70 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
CLC449AJEIC OP AMP MONO 1.2GHZ 8-SOIC |
661 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Feedback | 1 | - | 2500V/µs | - | 1.1 GHz | 6 µA | 3 mV | 12mA | 90 mA | 10 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2111KMIC OPAMP GP 2 CIRCUIT TO99-8 |
3,465 | - |
|
Datasheet | Difet® | TO-99-8 Metal Can | Bulk | Obsolete | General Purpose | 2 | - | 2V/µs | 2 MHz | - | 3 pA | 300 µV | 5mA (x2 Channels) | 10 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
VCA8613YTIC VARIABLE GAIN 8 CIRC 64TQFP |
1,487 | - |
|
Datasheet | - | 64-TQFP | Tape & Reel (TR) | Obsolete | Variable Gain | 8 | Differential | 300V/µs | 70 MHz | - | 1 nA | - | - | - | 2.85 V | 3.15 V | -40°C ~ 85°C | - | - | Surface Mount | 64-TQFP (10x10) |
|
TLC2652MJGBIC OPAMP ZER-DRIFT 1CIRC 8CDIP |
255 | - |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Chopper (Zero-Drift) | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.6 µV | 1.5mA | 50 mA | 3.8 V | 16 V | -55°C ~ 125°C | - | - | Through Hole | 8-CDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
