Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM759CHIC OP AMP POWER TO-99-8 |
942 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Obsolete | Power | 1 | - | 0.5V/µs | 1 MHz | - | 50 nA | 1 mV | 12mA | 500 mA | 9 V | 36 V | 0°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
ISO100APIC OPAMP ISOLATION 1 CIRC 18CDIP |
2,582 | - |
|
Datasheet | - | 18-CDIP (0.300", 7.62mm) | Tube | Obsolete | Isolation | 1 | - | 0.31V/µs | - | 60 kHz | - | 500 µV | 8mA | 40 mA | 14 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 18-CDIP |
|
|
ISO100BPIC OPAMP ISOLATION 1 CIRC 18CDIP |
3,756 | - |
|
Datasheet | - | 18-CDIP (0.300", 7.62mm) | Tube | Obsolete | Isolation | 1 | - | 0.31V/µs | - | 60 kHz | - | 300 µV | 8mA | 40 mA | 14 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 18-CDIP |
|
OPA512BMIC OPAMP GP 1 CIRCUIT TO3-8 |
3,051 | - |
|
Datasheet | - | TO-3-8 | Tube | Obsolete | General Purpose | 1 | - | 4V/µs | 4 MHz | - | 12 nA | 2 mV | 25mA | 10 A | 20 V | 90 V | -25°C ~ 85°C | - | - | Through Hole | TO-3-8 |
|
4127KGIC LOGARITHMIC 2 CIRCUIT 24CDIP |
1,831 | - |
|
Datasheet | - | 24-CDIP (0.600", 15.24mm) | Tube | Obsolete | Logarithmic | 2 | - | - | - | 90 kHz | 40 nA | 5 mV | 20mA | 5 mA | 28 V | 32 V | 0°C ~ 60°C | - | - | Through Hole | 24-CDIP |
|
ISO102IC OPAMP ISOLATION 1 CIRC 16CDIP |
4,531 | - |
|
Datasheet | - | 24-CDIP (0.600", 15.24mm), 16 Leads | Tube | Obsolete | Isolation | 1 | - | 0.5V/µs | - | 70 kHz | - | 25 mV | 25mA | 5 mA | 20 V | 40 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
|
ISO120GIC OPAMP ISOLATION 1 CIRC 16CDIP |
4,641 | - |
|
Datasheet | - | 24-CDIP (0.300", 7.62mm), 16 Leads | Bulk | Active | Isolation | 1 | - | 2V/µs | - | 60 kHz | - | 10 mV | 4mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
|
ISO102BIC OPAMP ISOLATION 1 CIRC 16CDIP |
4,131 | - |
|
Datasheet | - | 24-CDIP (0.600", 15.24mm), 16 Leads | Tube | Obsolete | Isolation | 1 | - | 0.5V/µs | - | 70 kHz | - | 15 mV | 25mA | 5 mA | 20 V | 40 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
|
3584JMIC OPAMP GP 1 CIRCUIT TO3-8 |
1,826 | - |
|
Datasheet | - | TO-3-8 | Tube | Obsolete | General Purpose | 1 | - | 150V/µs | 20 MHz | - | 20 pA | 3 mV | 6.5mA | 15 mA | 140 V | 300 V | 0°C ~ 70°C | - | - | Through Hole | TO-3-8 |
|
|
ISO103IC OPAMP ISOLATION 1 CIRC 16CDIP |
3,735 | - |
|
Datasheet | - | 24-CDIP (0.600", 15.24mm), 16 Leads | Tube | Obsolete | Isolation | 1 | - | 1.5V/µs | - | 20 kHz | - | 20 mV | 90mA | 15 mA | 20 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
