Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC2252TDA2IC OPAMP GP 2 CIRCUIT DIE |
1,883 | - |
|
Datasheet | LinCMOS™ | Die | Tube | Active | General Purpose | 2 | Rail-to-Rail | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | Die |
|
INA2141UAIC INST AMP 2 CIRCUIT 16SOIC |
4,739 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | Instrumentation | 2 | - | 4V/µs | - | 200 kHz | 2 nA | 20 µV | 1.5mA (x2 Channels) | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
OPA637AMIC OPAMP GP 1 CIRCUIT TO99-8 |
4,988 | - |
|
Datasheet | Difet® | TO-99-8 Metal Can | Tube | Not For New Designs | General Purpose | 1 | - | 135V/µs | 80 MHz | - | 2 pA | 130 µV | 7mA | 45 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
|
OPA637SMIC OPAMP GP 1 CIRCUIT TO99-8 |
4,849 | - |
|
Datasheet | Difet® | TO-99-8 Metal Can | Tube | Not For New Designs | General Purpose | 1 | - | 135V/µs | 80 MHz | - | 1 pA | 40 µV | 7mA | 45 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
INA129SHKJIC INST AMP 1 CIRCUIT 8CFP |
4,083 | - |
|
Datasheet | - | 8-CFlatPack | Tube | Active | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 2 nA | 25 µV | 700µA | 15 mA | 4.5 V | 36 V | -55°C ~ 210°C | - | - | Surface Mount | 8-CFP |
|
TL3472CPIC OPAMP GP 2 CIRCUIT 8DIP |
340 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 13V/µs | 4 MHz | - | 100 nA | 1 mV | 3.5mA (x2 Channels) | 34 mA | 4 V | 36 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
INA186A5QDBVRQ1IC CURR SENSE 1 CIRCUIT TSOT23-8 |
2,262 | - |
|
Datasheet | - | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Active | Current Sense | 1 | Rail-to-Rail | 0.3V/µs | - | 27 kHz | 500 pA | 3 µV | 48µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | TSOT-23-8 |
|
INA215BIDCKTIC CURR SENSE 1 CIRCUIT SC70-6 |
1,000 | - |
|
Datasheet | Zero-Drift | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 0.4V/µs | 40 kHz | - | 28 µA | 1 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-6 |
|
OPA2325IDIC CMOS 2 CIRCUIT 8SOIC |
2,691 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 5V/µs | 10 MHz | - | 0.2 pA | 40 µV | 650µA (x2 Channels) | - | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
OPA828IDGNTHIGH-SPEED (45 MHZ AND 150 V/S), |
2,941 | - |
|
Datasheet | - | 8-PowerTSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | Single-Ended | 150V/µs | 45 MHz | - | 0.2 pA | 25 µV | 5.5mA | 30 mA | 8 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-HVSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
