Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM318DG4IC OPAMP GP 15MHZ 8SOIC |
650 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 70V/µs | 15 MHz | 15 MHz | 150 nA | 4 mV | 5mA | - | 10 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLV2632IPIC OPAMP GP 2 CIRCUIT 8DIP |
565 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 10V/µs | 9 MHz | - | 0.7 pA | 1.1 mV | 3.8mA (x2 Channels) | 28 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
|
TLC080CPIC OPAMP GP 1 CIRCUIT 8DIP |
1,000 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 16V/µs | 10 MHz | - | 3 pA | 390 µV | 1.9mA | 57 mA | 4.5 V | 16 V | 0°C ~ 70°C (TA) | Automotive | AEC-Q100 | Through Hole | 8-PDIP |
|
TLV2624INIC CMOS 4 CIRCUIT 14DIP |
525 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | CMOS | 4 | Rail-to-Rail | 6V/µs | 11 MHz | - | 2 pA | 250 µV | 800µA (x4 Channels) | 28 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Through Hole | 14-PDIP |
|
|
TL072CPSRIC OPAMP JFET 2 CIRCUIT 8SO |
143 | - |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 13V/µs | 3 MHz | - | 65 pA | 3 mV | 1.4mA (x2 Channels) | - | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SO |
|
TLV2633INIC OPAMP GP 2 CIRCUIT 14DIP |
592 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 10V/µs | 9 MHz | - | 0.7 pA | 1.1 mV | 3.8mA (x2 Channels) | 28 mA | 2.7 V | 5.5 V | -40°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
TLC27M4BCDRIC OPAMP GP 4 CIRCUIT 14SOIC |
4,056 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.62V/µs | 525 kHz | - | 0.7 pA | 260 µV | 570µA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
TLV2625INIC CMOS 4 CIRCUIT 16DIP |
529 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 7V/µs | 11 MHz | - | 2 pA | 250 µV | 800µA (x4 Channels) | 28 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Through Hole | 16-PDIP |
|
|
TL032CDE4IC OPAMP JFET 2 CIRCUIT 8SOIC |
850 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 5.1V/µs | 1.1 MHz | - | 2 pA | 570 µV | 422µA (x2 Channels) | 40 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
LM324DIC OPAMP GP 4 CIRCUIT 14SOIC |
512 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 40 mA | 3 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
