Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
RC4558IPWIC OPAMP GP 2 CIRCUIT 8TSSOP |
982 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | General Purpose | 2 | Differential | 1.7V/µs | 3 MHz | - | 150 nA | 500 µV | 2.5mA (x2 Channels) | 10 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP |
|
LF411IDIC OPAMP JFET 1 CIRCUIT 8SOIC |
957 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | J-FET | 1 | - | 15V/µs | 3 MHz | - | 50 pA | 800 µV | 2mA | - | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
TL082CPWIC OPAMP JFET 2 CIRCUIT 8TSSOP |
899 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | J-FET | 2 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA (x2 Channels) | 10 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-TSSOP |
|
TLV2784CDIC OPAMP GP 4 CIRCUIT 14SOIC |
936 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x4 Channels) | 23 mA | 1.8 V | 3.6 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
TLV2471CDG4IC OPAMP GP 2.8MHZ RRO 8SOIC |
375 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA | 35 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LM224ADIC OPAMP GP 4 CIRCUIT 14SOIC |
907 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 15 nA | 2 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 30 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
INA180B3IDBVTIC CURR SENSE 1 CIRCUIT SOT23-5 |
1,217 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | Rail-to-Rail | 2V/µs | - | 350 kHz | 80 µA | 100 µV | 260µA | - | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
INA180B4IDBVTIC CURR SENSE 1 CIRCUIT SOT23-5 |
737 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | Rail-to-Rail | 2V/µs | - | 350 kHz | 80 µA | 100 µV | 260µA | - | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
INA180B2IDBVTIC CURR SENSE 1 CIRCUIT SOT23-5 |
663 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | Rail-to-Rail | 2V/µs | - | 350 kHz | 80 µA | 100 µV | 260µA | - | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
OPA632UIC OPAMP VFB 68MHZ SGL 8SOIC |
463 | - |
|
Datasheet | SpeedPlus™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 100V/µs | 68 MHz | 75 MHz | 11 µA | 2.5 mV | 6mA | 90 mA | 2.7 V | 10.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
